When transmitting and manually pressing a digit on the front panel. the DTMF tones are not being transmitted. This used to work... Did I somehow disable this feature in the programming somehow without knowing?
Thanks
GP-2000 DTMF stopped working?
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
how can anyone answer that without seeing or knowing what you altered in it? we need alot more info.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
The manual DTMF should normally always work on transmit, I don't have it tied to any sort of signaling, PTT-ID, etc. Like my Jedi radios, I have the ability to either enable the dtmf in each personality, but since I hardly use this radio, I can't remember if the dtmf generation was tied to another option that I might have turned off recently.
GP-2000 dtmf problem - resolved
I found out what the problem was.
I found the "dtmf tx tone duration" set to 25 milliseconds. Should have been around 200 ms or more.
I found the "dtmf tx tone duration" set to 25 milliseconds. Should have been around 200 ms or more.