Maxtrac Problem

Two Tone · Post by **Two Tone** » Tue Dec 19, 2006 2:27 pm

Ive got a moto maxtrac that wont transmit and the RX/TX light blinks as if it was RX but there is nothing being recieved. The rest of the audio works. Any ideas?

emsbuff3240 · Post by **emsbuff3240** » Tue Dec 19, 2006 2:36 pm

are you sure you have the PLs set right?

Two Tone · Post by **Two Tone** » Tue Dec 19, 2006 2:52 pm

No PL's on any freq

Max-trac · Post by **Max-trac** » Tue Dec 19, 2006 5:03 pm

You may have more than one problem.
What does it do if you hold the monitor button in for several seconds?

KE7DZZ · Post by **KE7DZZ** » Tue Dec 19, 2006 5:46 pm

Is it UHF model in the 449-470 split? If so are you trying to use in on ham freqs? If that is the case you will need to do a simple realignment of the radio. Look here.

oldfan49 · Post by **oldfan49** » Thu Dec 21, 2006 12:52 pm

Check your programming to be sure busy channel lockout is not turned on

meech · Post by **meech** » Thu Dec 21, 2006 1:46 pm

As far as the light flashing, is it too close to your PC.