HLN9742 FLASH ADAPTOR
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
HLN9742 FLASH ADAPTOR
anyone have the correct diagram for the hln9742 flash adaptor or a picture of the inside? the one posted here on batlabs is wrong.l
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: HLN9742 FLASH ADAPTOR
Just ad a line from pin 1 to pin 7 on the DB25FM. That will correct the problem.HLA wrote:anyone have the correct diagram for the hln9742 flash adaptor or a picture of the inside? the one posted here on batlabs is wrong.l
Jim.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
thanks, i did know to jump 1 & 7 but i was more wondering which pin gets jumped to pin 25 to boot portables? i know for positive for mobiles you jump 1 & 7 to 25 but since the factory adaptor is an a/b switch, which pin coming out of the rib box gets connected to the switch and sends to pin 25 on the test cable?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I'll look at mine later today. I used the one from Batlabs, I just added the line form 1 to 7 to get it to work. I have used it on HT1250's, HT1550's, and CDM's with no problems.HLA wrote:thanks, i did know to jump 1 & 7 but i was more wondering which pin gets jumped to pin 25 to boot portables? i know for positive for mobiles you jump 1 & 7 to 25 but since the factory adaptor is an a/b switch, which pin coming out of the rib box gets connected to the switch and sends to pin 25 on the test cable?
I use the RIBless cables also.
Jim
Last edited by n7maq on Sat Jan 06, 2007 11:11 am, edited 1 time in total.
