Alright, I'm dying with curiosity here...
What exactly is the point of a programming cable for the GP68?
GP68 Programming Cables...?
Moderator: Queue Moderator
Re: GP68 Programming Cables...?
Keeping an archive file on the computer to dump back in the radio instead of having to totally reprogram the radio from scratch would be one.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: GP68 Programming Cables...?
you can not program the gp68 at all with any cable or read and store codeplugs, that cable you are asking about is for tuning purposes, the radio still needs to be aligned.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: GP68 Programming Cables...?
True, you can not program the GP68 with a computer, ect.
BUT you CAN CLONE the GP68 to another with the cloning cable.
The cable with the DB25 connector is for alignment purposes.
BUT you CAN CLONE the GP68 to another with the cloning cable.
The cable with the DB25 connector is for alignment purposes.