mcs 2000 audio

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
cophamguy
Posts: 56
Joined: Mon Feb 13, 2006 7:07 pm

mcs 2000 audio

Post by cophamguy »

I just installed the VHF MCS 2000 in my car. It powers up fine and I had no trouble programming it (CPS R01.13.00).

Problem is even with the volume knob all the way up, the audio is so quiet I can only hear it when I put it up to my ear. I tried a speaker out of another vehicle that I KNOW works...same problem. I checked the speaker wire for low voltage. I am getting 6.xx volts into the speaker on receive. This should be plenty.

What am I doing wrong? Is there a mute function I dont know about?
Top
cophamguy
Posts: 56
Joined: Mon Feb 13, 2006 7:07 pm

Re: mcs 2000 audio

Post by cophamguy »

got it!

...had a bent pin on the drawer unit.
Top
Post Reply

Return to “Vehicle Radio Installs”