Is it fairly simple to remove an HT1000 DTMF keyboard and make the radio a non DTMF version?
Not sure if there would be any firmware or hidden hardware issues of any kind.
Thanks.
HT1000 Keypad Removal
Moderator: Queue Moderator
-
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: HT1000 Keypad Removal
Quite simple. Toggling between DTMF and non-DTMF on a radio that came with it from the factory can be done in the software. Quoted from Batlabs:
In fact, if you want to find a home for that DTMF front, PM me..
Hardware-wise, all you need is a non-keypad plastic front with the electronics included. Just pop the old one off and pop the new one on.If you have RSS version R03.02.01 or newer, you can enable DTMF by going into the Radio Wide Screen (F4-F3-F2 from the Main Menu), then press ctrl-shift-F7. This should bring up a special options screen from which you can enable or disable DTMF (option H297). Note that the caveat is that this only works on a radio that was originally equipped with a DTMF pad. If the radio didn't come with a DTMF pad from the factory, then the only way to make it work is to hex edit the codeplug.
In fact, if you want to find a home for that DTMF front, PM me..

Re: HT1000 Keypad Removal
Good to know it is indeed a simple procedure.motorola_otaku wrote:Quite simple. Toggling between DTMF and non-DTMF on a radio that came with it from the factory can be done in the software. Quoted from Batlabs:Hardware-wise, all you need is a non-keypad plastic front with the electronics included. Just pop the old one off and pop the new one on.If you have RSS version R03.02.01 or newer, you can enable DTMF by going into the Radio Wide Screen (F4-F3-F2 from the Main Menu), then press ctrl-shift-F7. This should bring up a special options screen from which you can enable or disable DTMF (option H297). Note that the caveat is that this only works on a radio that was originally equipped with a DTMF pad. If the radio didn't come with a DTMF pad from the factory, then the only way to make it work is to hex edit the codeplug.
In fact, if you want to find a home for that DTMF front, PM me..
Will keep you in mind provided I can get the radio.