Can you help me?
I need correct pin out of this power supply and, if possible, a schema.
Thanks a lot
Max
Motorola GmbH GPN 6106A power supply
Moderator: Queue Moderator
-
- Posts: 12
- Joined: Fri Nov 25, 2005 3:36 am
-
- Posts: 7
- Joined: Tue Aug 31, 2004 3:06 pm
- What radios do you own?: XTS3k, Saber I,II,III; GP380..
Re: Motorola GmbH GPN 6106A power supply
Hi Guys,
have the same GPN6101A, does anyone now anything about this item??
There ist a 6pin Connector in the front, for what type of radios is that. The Pinout is needed cause there is a fuse with 2.5A
but the whole think has this specifications 13,6V 130VA-
Thanks Georgeman
have the same GPN6101A, does anyone now anything about this item??
There ist a 6pin Connector in the front, for what type of radios is that. The Pinout is needed cause there is a fuse with 2.5A
but the whole think has this specifications 13,6V 130VA-
Thanks Georgeman
Visit the largest online Pager Museum only on www.Georgeman.de
Follow on it onFacebook :Georgemans-Pager-Museum-G-P-M on Facebook
Follow on it onFacebook :Georgemans-Pager-Museum-G-P-M on Facebook
Re: Motorola GmbH GPN 6106A power supply
You should be able to figure it out pretty quickly with any decent multimeter.
The 2.5A fuse is most likely the AC line fuse...
The 2.5A fuse is most likely the AC line fuse...
Re: Motorola GmbH GPN 6106A power supply
If I remember, there is 120 volts AC line on the connector for on-off switching.
Re: Motorola GmbH GPN 6106A power supply
These trimmers seem to adjust the output voltages:
http://personal.inet.fi/koti/juha.nurmela/S6302307.JPG
Both did reach 13.8v
Juha
http://personal.inet.fi/koti/juha.nurmela/S6302307.JPG
Both did reach 13.8v
Juha