Motorola GmbH GPN 6106A power supply

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
montegrande
Posts: 12
Joined: Fri Nov 25, 2005 3:36 am

Motorola GmbH GPN 6106A power supply

Post by montegrande »

Can you help me?
I need correct pin out of this power supply and, if possible, a schema.

Thanks a lot

Max
Georgeman
Posts: 7
Joined: Tue Aug 31, 2004 3:06 pm
What radios do you own?: XTS3k, Saber I,II,III; GP380..

Re: Motorola GmbH GPN 6106A power supply

Post by Georgeman »

Hi Guys,

have the same GPN6101A, does anyone now anything about this item??
There ist a 6pin Connector in the front, for what type of radios is that. The Pinout is needed cause there is a fuse with 2.5A
but the whole think has this specifications 13,6V 130VA-


Thanks Georgeman
Visit the largest online Pager Museum only on www.Georgeman.de


Follow on it onFacebook :Georgemans-Pager-Museum-G-P-M on Facebook
tvsjr
Posts: 4118
Joined: Fri Nov 28, 2003 9:46 am

Re: Motorola GmbH GPN 6106A power supply

Post by tvsjr »

You should be able to figure it out pretty quickly with any decent multimeter.

The 2.5A fuse is most likely the AC line fuse...
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Motorola GmbH GPN 6106A power supply

Post by Will »

If I remember, there is 120 volts AC line on the connector for on-off switching.
oh5nxo
New User
Posts: 1
Joined: Wed Aug 08, 2012 8:56 am

Re: Motorola GmbH GPN 6106A power supply

Post by oh5nxo »

These trimmers seem to adjust the output voltages:
http://personal.inet.fi/koti/juha.nurmela/S6302307.JPG

Both did reach 13.8v
Juha
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”