Probably a big programming problem with my CDM1550 LS

[KC9LDB]

Its a remote mount AAM25SKF9AA5AN with the version number of R05.02.03 last programmed with Depot RSS
The code plug version is 02.21 for the orgional and latest (what I used)
I used CPS R06.04.00
The problem is "Image is Corrupted. Checksum for R/W region failed
The Head will say EEPRM CSERROQ or something......
Any thoughts??

[ve3nsv]

If you have a good archived codeplug you can always try programming and reviving the radio with that. If not it will most likely mean a trip to the depot.

Its a remote mount AAM25SKF9AA5AN with the version number of R05.02.03 last programmed with Depot RSS
The code plug version is 02.21 for the orgional and latest (what I used)
I used CPS R06.04.00
The problem is "Image is Corrupted. Checksum for R/W region failed
The Head will say EEPRM CSERROQ or something......
Any thoughts??

[KC9LDB]

No good, this is my 1st time programming the radio, i never had any other data nor did i back it up. What exactly is a codeplug anyway?

[Victor Xray]

Your problem probably is due to the OLD OLD version of your software. Purchase the newest software version from Motorola.

[a_j_b]

I highly recommend you only program it from the 20pin in the back of the radio. Remote heads cause havoc.

[KC9LDB]

Does anyone have a codeplug for this radio?

[Al]

if you search here for "codeplug supersite", you'll see:
http://www.codeplugsupersite.com/

Take a look there and see if what you're looking for is available.

[KC9LDB]

Al- YOU ROCK!!! works like a charm thank you so much!!!!
Joe