A few questions
What are the differences between the JT1000 and the HT1000?
Obviously the FPP function on the JT1000.
Is that really the only major difference?
Is the JT1000 spec'd the same way as the HT1000 is as. as far as durability/designed for public safety use?
Are all parts interchangable (batteries, speaker mics etc.)?
I've read the model specific info on the page here and searched the forums
Any insight is appreciated
JT1000 Vs HT1000
Moderator: Queue Moderator
Re: JT1000 Vs HT1000
It's more or less a field-programmable HT1000. I don't believe it has MDC capability. I think certain versions of the JT1000 were capable of QCII decode, others were not. I believe there is NO support for RSS based frequency programming, I believe ALL frequency programming MUST be done from the front panel. The RSS is only for tuning the radio.
Someone correct me if I'm wrong, but this is what I remember of it.
Someone correct me if I'm wrong, but this is what I remember of it.
- Victor Xray
- Posts: 845
- Joined: Mon Dec 17, 2001 4:00 pm
Re: JT1000 Vs HT1000
Sorry, wrong.
JT1000 can be programmed via RSS just like an HT1000.
It also has an LCD screen which an HT1000 does not have.
JT1000 can be programmed via RSS just like an HT1000.
It also has an LCD screen which an HT1000 does not have.
Re: JT1000 Vs HT1000
Is the JT1000 Mil Spec?
- Victor Xray
- Posts: 845
- Joined: Mon Dec 17, 2001 4:00 pm
Re: JT1000 Vs HT1000
The JT1000's do not support 2.5KHz channel steps, they will not work with some narrow band channels due to that. I don't know if that is true with the newer rev's of HT1000's.
- Jim2121
- Batboard $upporter
- Posts: 881
- Joined: Wed Dec 10, 2003 2:36 pm
- What radios do you own?: A few! Most I sign out!
Re: JT1000 Vs HT1000
The HT1000 does have MDC 1200 & QCII. However I have seen some that did not support in the HT1000 MDC. Mine does ending in a serial no. with a BN (you can do a Search here -- type in MDC + HT1000 and you will get 150 hits)d119 wrote:It's more or less a field-programmable HT1000. I don't believe it has MDC capability. I think certain versions of the JT1000 were capable of QCII decode, others were not. I believe there is NO support for RSS based frequency programming, I believe ALL frequency programming MUST be done from the front panel. The RSS is only for tuning the radio.
Someone correct me if I'm wrong, but this is what I remember of it.
The main Batlab page has a page on this topic; http://www.batlabs.com/visar.html
Messages can't be intercepted if they aren't sent, can they?
Erwin Rommel
Erwin Rommel