CDM 1250 service mode??

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
TheOCAstro
Posts: 33
Joined: Thu Feb 02, 2006 1:19 pm

CDM 1250 service mode??

Post by TheOCAstro »

I saw a topic on this issue a while back however I'm unable to locate it, and can use a lil help:

I have a CDM 1250 where the user pushed the volume button in to long putting the radio into some type of service mode.

Before I start tinkering and turn the radio into a brick, would Anyone out there know how to get it out of this mode?

Thanks
User avatar
Josh
Posts: 1931
Joined: Mon Sep 03, 2001 4:00 pm
What radios do you own?: APX4K, XTL5K, NX5200, NX700HK

Re: CDM 1250 service mode??

Post by Josh »

TheOCAstro wrote:I saw a topic on this issue a while back however I'm unable to locate it, and can use a lil help:

I have a CDM 1250 where the user pushed the volume button in to long putting the radio into some type of service mode.

Before I start tinkering and turn the radio into a brick, would Anyone out there know how to get it out of this mode?

Thanks

If it's in test mode, removing the power source, then reconnecting it will fix the problem.
TheOCAstro
Posts: 33
Joined: Thu Feb 02, 2006 1:19 pm

Re: CDM 1250 service mode??

Post by TheOCAstro »

Thanks, That Worked !!!
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”