We are using the XTS5000 mics (RMN5023BSP01) that have the controls on them for volume and man-down. My question is when the radio is powered on the radio goes through self check and emits a beep and then a few seconds later the mic does the same thing. Is this some sort of self test for the mic? I have been looking on the net with little luck on what this might be. Looked through the CPS with no luck either on the subject. I was thinking that a standard mic would do this as well and using one of the non button mics produces no beep.
Thanks for the information in advance.
XTS Mic question
Moderator: Queue Moderator
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 81
- Joined: Thu Dec 04, 2008 7:09 pm
- What radios do you own?: MTS2000, CDM1550 XTS5000
- FireCpt809
- Posts: 1848
- Joined: Sat Jan 19, 2002 4:00 pm
- What radios do you own?: Alot..
Re: XTS Mic question
Mine does that too.. Its just a self check for the enhanced mic. It doent affect the mic or radio.
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 81
- Joined: Thu Dec 04, 2008 7:09 pm
- What radios do you own?: MTS2000, CDM1550 XTS5000
Re: XTS Mic question
Ok yeah I threw one of the mics on it with a channel selector knob on it as well and it did the same thing. So I will not worry abut the beep. Thanks for the information on that though.