Motorola CP200 CPS litriture help

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
rodrocket
New User
Posts: 9
Joined: Tue Jun 30, 2009 4:06 am
What radios do you own?: Motorola CP200,GM950 Plus

Motorola CP200 CPS litriture help

Post by rodrocket »

greetings all

i am looking for Litriture only on how to program the CP200 series radios

i am not looking for the CPS software to do it i just want to view the working notes of how to use the software

if anybody can help with this it would be much appreciated

regards
rod
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: Motorola CP200 CPS litriture help

Post by escomm »

This will be a fun catch-22 because the literature is in the help file, which comes with CPS. So you will need to buy CPS from Motorola in order to get the help file if you don't already have CPS
rodrocket
New User
Posts: 9
Joined: Tue Jun 30, 2009 4:06 am
What radios do you own?: Motorola CP200,GM950 Plus

Re: Motorola CP200 CPS litriture help

Post by rodrocket »

thanks for the reply

the help folder is there but is a little above my head as i am not into the radio gear

the reason i bought the radios was to use in a race team & i bought the software thinking that i could do it myself but as i said it is above me

that is why i am looking for some simple instructions or somebody who can help me with it

regards
rod
rodrocket
New User
Posts: 9
Joined: Tue Jun 30, 2009 4:06 am
What radios do you own?: Motorola CP200,GM950 Plus

Re: Motorola CP200 CPS litriture help

Post by rodrocket »

i have worked out that i have to add the extra channels as the radio's only come with the 1 channel pre programend

what i carnt get my head around is the privacy part

how do i set the tone to open the other radio to allow it to receive, i know the section in the CPS but dont know what to input in there

it would be so much easier for me to take this to a radio dealer but i am unable to find anybody here in Australia who does this for the CP200 radios

all i am wanting to do is programe these to use with our race car

regards
rod
Post Reply

Return to “Radio Programming”