M1225/P1225

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
funsun71
New User
Posts: 5
Joined: Fri Oct 31, 2008 7:10 am

M1225/P1225

Post by funsun71 »

If I recall correctly, the early versions of these radios were either wide or narrow and not programmable on a per channel basis. Later versions were programmable on a per channel basis. Can anybody confirm this is the case, and if so, how to tell difference?
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: M1225/P1225

Post by Will »

The "1225" does both 25 khz and 12.5 khz channel spacing.
Top
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: M1225/P1225

Post by Bill_G »

Every one I ever touched had the bandwidth programmable per channel. I do not recall a global setting for narrow or wide. I have no way to confirm the earliest versions were otherwise.
Top
35echo
Posts: 107
Joined: Sun Dec 02, 2007 8:07 pm

Re: M1225/P1225

Post by 35echo »

From the first production run until cancellation these were programable 12.5K/25K per CHANNEL not radio wide.

Regards,

Allen
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”