Hello,
I clicked ignition switch in the cps and programmed it by accident. Now my radio doesnt turn on from the two prong connector in the back. Any ideas on how to fix this? If im going to have to get a switch cable or something or make one, please be specific. Thanks.
cdm1550ls+ ignition switch.
Moderator: Queue Moderator
-
dispatcher7586
- New User
- Posts: 75
- Joined: Thu Jul 19, 2007 2:13 pm
- What radios do you own?: Most of them! :-)
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: cdm1550ls+ ignition switch.
Go back into the CPS and unclick what you clicked before. Either that or find out where the ignition sense connection is on the back of the radio and feed it with 12 volts DC. Either one or the other -- your choice.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: cdm1550ls+ ignition switch.
Pin #10 is the Ignition sense line.
Top row is even, bottom is odd....Looking at the plug from the back, of course.
You can also program this option as 'both' ignition and on/off button, so you can get either to work.
Top row is even, bottom is odd....Looking at the plug from the back, of course.
You can also program this option as 'both' ignition and on/off button, so you can get either to work.
-
dispatcher7586
- New User
- Posts: 75
- Joined: Thu Jul 19, 2007 2:13 pm
- What radios do you own?: Most of them! :-)
Re: cdm1550ls+ ignition switch.
The radio wont turn on now. So there is no power to program it.
IDK?
-
dispatcher7586
- New User
- Posts: 75
- Joined: Thu Jul 19, 2007 2:13 pm
- What radios do you own?: Most of them! :-)
Re: cdm1550ls+ ignition switch.
Sorry for the multiple post.
I mean I clicked "follow ignition only" then programmed and now it wont turn back on via the red/black power cable connected to a 12v supply.
I mean I clicked "follow ignition only" then programmed and now it wont turn back on via the red/black power cable connected to a 12v supply.
IDK?
Re: cdm1550ls+ ignition switch.
You need to run a lead from your hot power to pin 10 on the back of the radio. Be careful, you don't want to accidently ground that lead or you might see some smoke.