Strange problem Gp344

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
Pacman
New User
Posts: 1
Joined: Mon Feb 01, 2010 11:01 am

Strange problem Gp344

Post by Pacman »

Hi guys, anybody around here who have I clue what’s wrong with my Gp344. When I turn it off the radio starts to beep every five seconds. Not until I turn it on the beep stops and the radio seems to work fine. I have tried upgrading the radio with new firmware but no luck.
moztas
Posts: 44
Joined: Wed Jan 28, 2009 8:13 am

Re: Strange problem Gp344

Post by moztas »

Hi,

If I understand correctly and this beep is a power up alert tone, there can be a hardware problem in your GP344. As you know, these radios have electronic ON/OFF control circuit. Possible reason is damaged "Q400" tstr mosfet which is located on control board or any other ON/OFF control circuit problem or maybe broken paths on control card.

If there is a short-circuit in Q400 then radio can not shutdown itself because SWB+ (7.5V battery) will continue to support the whole board over damaged mosfet.

BTW, it is just my guess. I hope you will find a solution.

BR,
moztas
moztas
Posts: 44
Joined: Wed Jan 28, 2009 8:13 am

Re: Strange problem Gp344

Post by moztas »

Hi,

Interesting! I just repaired a GP388 radio which had same problem like your radio. When I turn the radio off starts to beep (power up alert tone) about every five seconds. I changed Q400 mosfet as I decribed above and radio works fine now!

BR,
moztas
Post Reply

Return to “Radio Programming”