ok guys, need a little technical help here, I have a Spectra with a standard (large) hand mic, and I want to re-wire a HMN1056d (small) mic to the spectra, but am running into a brick wall finding wiring diagrams for either mic, now I know that the large mic only uses 5 wires (yellow is cut flush) but I dont know if the 1056d is the same way.
any and all help would be greatly appreciated.
Mic Wiring
Moderator: Queue Moderator
-
- No Longer Registered
- Posts: 46
- Joined: Sun Oct 10, 2004 4:18 pm
- What radios do you own?: Yaesu FT-847, FT-900, XTS2500
Mic Wiring
Remember you Abilities and Dissabilities can become Possibilities.
Re: Mic Wiring
Your best bet is to do what I did. I call motorola and ordered the detailed service manuals for the equipment that I have. Most of the information is going to be in the manuals. It has been the best thing that I could have done. The most that I have payed is 35.00 shiping is 7.00 ground and the lowest I have payed was 7.50 for the manual
Jerry
Jerry
My Brain is out of Control.."ITS ALIVE"
Dr. FrankenMod
Dr. FrankenMod
Re: Mic Wiring
We should have these Mic cable colors available for others to use.
Spectra Mic:
Red Mic hi
BLK Mic lo
GRN PTT
WHT GND
BLU HUB
Maxtrac HLN5238A heavy duty/Mitrek style Mic:
GM 300 Black Mic:
Red Mic Hi
BLK Mic Lo
GRN PTT
BLU HUB
YEL not used
WHT Handset earphone audio
Spectra Mic:
Red Mic hi
BLK Mic lo
GRN PTT
WHT GND
BLU HUB
Maxtrac HLN5238A heavy duty/Mitrek style Mic:
GM 300 Black Mic:
Red Mic Hi
BLK Mic Lo
GRN PTT
BLU HUB
YEL not used
WHT Handset earphone audio
-
- No Longer Registered
- Posts: 46
- Joined: Sun Oct 10, 2004 4:18 pm
- What radios do you own?: Yaesu FT-847, FT-900, XTS2500
Re: Mic Wiring
Thank you Very Much Will, I really appreciate your taking time to help me.
Remember you Abilities and Dissabilities can become Possibilities.