Saber 5D core upgrade to 6D?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
clavo
Worse than Cowthief
Posts: 515
Joined: Mon Oct 15, 2001 4:00 pm

Post by clavo »

Possible? If so how? I done see anything specificly about this on the saber page.

Also... Any tips of fixing a saber that breaks squelch when there is no carrier. No matter how high I set the squelch on the channel it still does this.
Top
clavo
Worse than Cowthief
Posts: 515
Joined: Mon Oct 15, 2001 4:00 pm

Post by clavo »

I've heard 2 answers. That you need to replace hardware to get 6D CORE and that you can do it by just programming the radio with a 6D codeplug. Which is true??
Top
User avatar
batdude
Personal aide to Mr. Cook
Posts: 2741
Joined: Thu Oct 04, 2001 4:00 pm

Post by batdude »

the CORE cannot be upgraded by blasting a new CP into the radio...

you have to change the chip


doug
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”