Astro Saber Programming Issue
Moderator: Queue Moderator
-
n6rdt
- New User
- Posts: 5
- Joined: Tue Mar 08, 2011 10:55 pm
- What radios do you own?: CDM,M1225,Astro Saber,Sabers
Astro Saber Programming Issue
I have the windows based version of Astro Saber/XTS 3000 CPS. when i connect the radio to my cable and rib set up it says its not communicating. My rib is not motorola neither is the cable. However,Another tech has used my rib and cable to program astro sabers with his CPS. So I know my cable/rib works, Could it be I have an older version of the CPS then what is in the codeplug? Or are my ports just not open? I used the CPS to open comm port 1 and 2.
Re: Astro Saber Programming Issue
The city upgraded my working dell to a newer faster dell. Now I can no longer program MCS2000 or Astro Spectras or XTS3000s. Astro 25 still works.
It is a pain to pull out my toughbook for the other software.
It is a pain to pull out my toughbook for the other software.
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: Astro Saber Programming Issue
Before you go further, try it with Com Port 4. That is often a common setting. If you're getting a communication
error then it's not a software compatibility or similar problem.
error then it's not a software compatibility or similar problem.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
-
n6rdt
- New User
- Posts: 5
- Joined: Tue Mar 08, 2011 10:55 pm
- What radios do you own?: CDM,M1225,Astro Saber,Sabers
Re: Astro Saber Programming Issue
If It was a software problem what type of error would it show?