programming the 960 radios

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
proff
Posts: 91
Joined: Sun Jul 16, 2006 10:53 pm
What radios do you own?: Maxon,Motorola,Kenwood,uniden

programming the 960 radios

Post by proff »

I think it was the MTX960 radios,
I was given these radios and was asked to copy one radio and make the others the same so they could talk to each other.
I forgot how :(
I could read the target radio Ok , with the right software but couldn't clone to the other radios.
I couldn't change the serial number.
I couldn't enable the system keys.
what should i do?
Allen C
find me on 27.405 Mhz USB
User avatar
sglass
Batboard $upporter
Posts: 2282
Joined: Sat May 18, 2002 2:03 pm
What radios do you own?: sonic screwdriver

Re: programming the 960 radios

Post by sglass »

My response is not meant to sound douchey, please don't take it as such.


proff wrote:I couldn't change the serial number.
you don't need to.
proff wrote:I couldn't enable the system keys.
You don't need a system key enabled for conventional use.

proff wrote:what should i do?
Write down the conventional frequencies and pl/dpl codes from the target radio. The read the other radios and put those conventional personalities in them.
proff
Posts: 91
Joined: Sun Jul 16, 2006 10:53 pm
What radios do you own?: Maxon,Motorola,Kenwood,uniden

Re: programming the 960 radios

Post by proff »

i want to program the trunk info too
Allen C
find me on 27.405 Mhz USB
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”