Hello everybody,
I have GR500 (2xGM340 with basic controller), in order to setup this repeater lisenting on two channels, Do I need RSS software or I can do all the setup only with CPS ???
waiting a reply
Thanks
Program GR500
Moderator: Queue Moderator
-
- New User
- Posts: 33
- Joined: Sun Apr 13, 2008 4:15 pm
- What radios do you own?: Too many to list in this box
Re: Program GR500
Hello . Not familiar with the GM340 but I have a GR500 with a rick and a pair of M120 radios. They cable up the same as the GM300 and I have substituted one for the other after a lightning hit took out the RX. I use the GM300 RSS for both radios and it has an option to program the radios while in the repeater. I usually just program the radios individually in radio mode rather than repeater mode. Not familiar with CPS for those radios. The M120 RSS loads a BAT. file that executes the GM300 exe. file. Don't know if this helps you or not.
73 de Jeff/N0SIH
73 de Jeff/N0SIH
2-Moxy, 2 Maxar-80, 2 HT-50, 2 Maxtrac VHF, 3 SP-50, 2 P110, 1 GM-300,1 M-1225,
12 M-100, 10 MTX-HT,1 STX-HT, 1 Mostar, 1 Flexar repeater on UHF ham, 1 GR-300 UHF on ham, 1 GR-500 on VHF, 6 P-200 HT. Oh and a couple of crates of Micor junk too.
12 M-100, 10 MTX-HT,1 STX-HT, 1 Mostar, 1 Flexar repeater on UHF ham, 1 GR-300 UHF on ham, 1 GR-500 on VHF, 6 P-200 HT. Oh and a couple of crates of Micor junk too.
Re: Program GR500
Thank you so much for your reply
the problem is that I can't read those radios with RSS and after checking all the solutions (DOS mode, Ribless cable, RSS version....etc) I have been told that I have to use CPS.
the problem is that I can't read those radios with RSS and after checking all the solutions (DOS mode, Ribless cable, RSS version....etc) I have been told that I have to use CPS.
Re: Program GR500
The GM340 uses a Europe CPS software.
hamzagi wrote:Thank you so much for your reply
the problem is that I can't read those radios with RSS and after checking all the solutions (DOS mode, Ribless cable, RSS version....etc) I have been told that I have to use CPS.