MCS200 Mode (Channel) Steering

[jlemley]

Hello Group

Can anyone tell me if you can use binary channel steering on an MCS 2000?

I am trying to connect an ITA200A to the radio via the 25 pin accessory port to a 110 watt VHF mobile.

The ITA manual shows the pin-outs for the connection to the radio (conventional mode only), but the Channel Steer pins (1, 5, 8, 9, 15) shown on the chart say they are N/C or not connected.

I have done several searches both here and internet and I can’t really get a straight answer as to if the radio will do channel steering or not.

Thanks for any help

Jeff

[wavetar]

The MCS2000 is not capable of remote binary channel changing, it does not have the needed channel steering inputs.

[jlemley]

Thanks Wavetar
I knew one of you guys could set me straight.

Guess its a CDM and a TPL Amp..