GR 1225 PA replacement

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
dham66
New User
Posts: 13
Joined: Wed Aug 03, 2011 6:18 am

GR 1225 PA replacement

Post by dham66 »

I've been bouncing back and forth between old and new equipment, and am currently working with a customer that has 6 GR 1225 repeaters. I suspect one to have a bad PA, and did not realize that the RSS had a PA replacement wizard, but am unsure how to use it correctly. If anyone is knowledgeable in the use of this, I'm all ears for a crash course lesson.
Thanks
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: GR 1225 PA replacement

Post by Will »

The PA replacement is aligning/adjusting the transmitter power output at many points in the band so the tx has the same power output across the band.
Top
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: GR 1225 PA replacement

Post by Bill_G »

It is a self explanatory process. Follow the instructions on the screen. And then turn the station(s) down to 25W or less if they use it a lot to increase the lifetime of the equipment.
Top
Post Reply

Return to “Radio Programming”