Saber Vehicle Adaper

[grizgoalie]

Good day all,

If anyone knows what is the pinout for P18 on a SVA? I need to test one and lost/forgot the pin out.

Thanks,
Jim

[Mike B]

My 6881068C70-O SVA manual parts list only has P1 through P8 and I couldn't find P18 in the schematic. It appears there is no P18 in this early version of the manual.

[grizgoalie]

From my manual it states that the power and speaker plug is called P18. Six of the eight pins are populated. When I tested before all I used was power and speaker side to ensure it worked. Does your manual have the pin out for power on xx pin and speaker on xx pin?

[Mike B]

Your description doesn't match anything in my Saber Vehicular Adapter Instruction Manual or on my SVA hardware. The only 8 pin connector is the microphone RJ45. The power is a 4 pin connector:
pin 1 - Ground
pin 2 - Headlights
pin 3 - Ignition
pin 4 - A+

The 12 watt amplified speaker connector is 25 pins.

I have used these 4 pin and 25 pin connectors on the Astro Saber Vehicular Adapter (NTN7227B) also, by unplugging the Saber and plugging in the Astro Saber unit..

Somehow I don't think we are talking about the same equipment.

[grizgoalie]

Found my old pin out.

Thanks Mike B for the help attempt but we were talking apples and oranges.

Sorry for the delay in responding.

[grizgoalie]

To sum this all up it was indeed apples and oranges. I was misleading when I neglected to state that I was looking for the pin out for a MX-11496A. The Saber R version.

Sorry about that again.