strange message using cps and ht1250 vhf

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
phrawg
Posts: 690
Joined: Sun Sep 09, 2001 4:00 pm

strange message using cps and ht1250 vhf

Post by phrawg »

I have 1 ht750 and 2 ht1250's (vhf and very possibly all programmed
by the same shop) that return a message I have never seen before.
When I go to read the radio I get a box that says (maybe not exact
wording) "image has a block with ABSBLKID39, but the layout
does not have the block". :-? :-? :evil: and that is it.
Click ok and you are back to opening screen. When no radio is attached
the normal "no communication" error is given. Must be something in
the radio that someone figures is "super secret squirrel" or whatever.
or maybe locked out or passworded somehow ? Just to little chance
that 3 radios/2 models would do the same message if it is an error.
Any ideas on this ? T.I.A. guys for whatever help you can be.
Phrawg
BBbzzzzz... ZAP.. GULP !!! ahhhh GOOD fly !
Top
User avatar
fire_master_21
Batboard $upporter
Posts: 694
Joined: Sun Mar 14, 2004 3:23 pm
What radios do you own?: Motorola/Kenwood

Post by fire_master_21 »

have to tried another CP with them?
Light travels faster than sound. This is why some people appear bright until you hear them speak.
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

What version is your CPS? I have seen similar errors when trying to read newer programmed radios with an older version CPS, instead of the nice 'codeplug too new' error. It's not password protection for sure...that just comes up with a window asking for the password.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
User avatar
phrawg
Posts: 690
Joined: Sun Sep 09, 2001 4:00 pm

Post by phrawg »

version is 6.05 doesn't seem I have had that one that long but maybe
there is newer. Guess I should check and download a newer one.
I know I should be in my 3 years. Thanks, Dick, AKA Phrawg
BBbzzzzz... ZAP.. GULP !!! ahhhh GOOD fly !
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

Nah, 6.05 should be just fine for you...there's 6.05.03 out, but you can still read radios with 6.05 with it as far as I know. Weird problem...worth trying the newer one if you can I suppose.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
intermod
Posts: 9
Joined: Fri Sep 03, 2004 5:18 pm

Re: strange message using cps and ht1250 vhf

Post by intermod »

I just received a very similar message when reading an HT1250 using V2.XX of the CPS in W98. Uninstalled this and installed V6.05 (P/N HVN 9025N) and it reads and writes fine now.

Greg
N6LDJ
intermod
Top
User avatar
SteveC0625
Posts: 469
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: strange message using cps and ht1250 vhf

Post by SteveC0625 »

intermod wrote:I just received a very similar message when reading an HT1250 using V2.XX of the CPS in W98. Uninstalled this and installed V6.05 (P/N HVN 9025N) and it reads and writes fine now.

Greg
N6LDJ
The most current version of the HVN9025 CPS is R06.12.08. It's highly possible that there are a lot of HT's and CDM's floating around out there that have been programmed with way newer versions than what you have.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”