GP300 Xmit Problem

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Gary
Posts: 3
Joined: Tue Jan 01, 2002 4:00 pm

Post by Gary »

Hopeing some one can help. When PTT button pushed yellow light comes on and no Xmit. By repressing PTT it starts to work and will continue to Xmit as long as you only wait a few second between Transmissions. Receive seems normal.
Gary [email protected]
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

Gary,
Check the setting for Forced Monitor, it puts the radio into carrier squelch on the first press on the PTT and makes you rekey the radio to get it to transmit.
If not maybe the battery is weak causing the transmitter to shut down, but will usally beep at you when you unkey.
Top
kd5jbn
Posts: 4
Joined: Mon Dec 24, 2001 4:00 pm

Post by kd5jbn »

Go into the RSS mode and disable forced monitor and tx inhibit on busy.
73 de KD5JBN
Glenn
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”