JEDI error-message question

Keygun · Post by **Keygun** » Tue Jan 22, 2002 6:50 am

Hi folks.

I got an JEDI (MT2000) in my hands, which shows "TM1 ERR" after switching on. It is not readable or writable and does nothing, except continously showing this error message. Whats wrong?

Regards

Keygun

radioEd · Post by **radioEd** » Tue Jan 22, 2002 3:58 pm

I don't recall seeing that error? Is this a new radio? Or the one you changed a board on? (If I recall correct) and I see nothing on the error codes, & I have the latest copy of the Jedi manuals..unless its stuck in a test-mode, but thats a guess?

Post by **wavetar** » Tue Jan 22, 2002 4:58 pm

I can't find any reference to that in the manuals either. Is the radio one you've had for a while, or did someone bring it to you for service. Is it possible that's simply the channel name, and it's the only channel in the radio? Of course, that doesn't explain why there's no tx/rx or RSS communication, but you never know.

Todd

Nand · Post by **Nand** » Tue Jan 22, 2002 7:35 pm

OX · Post by OX » Tue Jan 22, 2002 8:15 pm

Testmode comes up with '1 CSQ'

Definitely a strange error, maybe got a controller from another country? Maybe someone tried to flash it as a MT2100, that concept has sprung up recently.

Keygun · Post by **Keygun** » Wed Jan 23, 2002 4:02 am

On 2002-01-22 18:58, radioEd wrote:
I don't recall seeing that error? Is this a new radio? Or the one you changed a board on? (If I recall correct) and I see nothing on the error codes, & I have the latest copy of the Jedi manuals..unless its stuck in a test-mode, but thats a guess?

No, it is another radio. The other one still works perfect. The radio does nothing, except TM1 ERR. I also must remove the battery in order to switch it off. My first guess was Toolproofing. But the radio is too old (1993).

Keygun

radioEd · Post by **radioEd** » Wed Jan 23, 2002 1:23 pm

No, it is another radio. The other one still works perfect. The radio does nothing, except TM1 ERR. I also must remove the battery in order to switch it off. My first guess was Toolproofing. But the radio is too old (1993).

Keygun
[/quote]
I'm wondering what's goin on? If you find out let us know please...tia Ed

Keygun · Post by **Keygun** » Thu Jan 24, 2002 6:37 am

On 2002-01-23 16:23, radioEd wrote:

No, it is another radio. The other one still works perfect. The radio does nothing, except TM1 ERR. I also must remove the battery in order to switch it off. My first guess was Toolproofing. But the radio is too old (1993).

Keygun

I'm wondering what's goin on? If you find out let us know please...tia Ed
[/quote]

The radio is no more readable or writable, so no chance to play with LAB

I`m loosing my nerve, so i will replace the control-unit with an good one (i think, i still have one). The rf-board is known to be OK, so it is worth the work.

Keygun

<font size=-1>[ This Message was edited by: Keygun on 2002-01-24 09:38 ]</font>