When I turn up the volume more than half way, the audio from the radio cuts out all lows - it's really annoying. Is their a setting in the CPS that I can configure to over ride this from occurring?
Thanks,
Ruby
Volume control on PRO-9150/HT-1550
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: Volume control on PRO-9150/HT-1550
what you're describing isn't a cps setting. have you tried to attach a speaker mic and see if still does it?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: Volume control on PRO-9150/HT-1550
Same results with spkr/mic. It's definitely something to do with CPS config - I changed something in the 'Emphasis Selection' (now set to 'De-Emphasis & Pre-Emphasis'), I'll try to revert back to one of the other settings to see if it helps.
Thanks!
Thanks!
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: Volume control on PRO-9150/HT-1550
Do you have an old default codeplug you can load for testing?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: Volume control on PRO-9150/HT-1550
It appears you have a defecive volume control pot, there are dead spots on the pot causing the volume to cut off.
Have it replaced and your problems should end.
Have it replaced and your problems should end.
Re: Volume control on PRO-9150/HT-1550
IIRC there is a chip capacitor in the volume control circuit that cracks due to excess mechanical force on the volume control.