The talk permit tone on my XP 6550 is ultra quiet - almost to the point of not being able to hear it in loud environments.
It has 1.11.02 F/W and I have programmed it with 8.6.
Is there anything within the CPS that could increase the volume of the TPT? I tried adjusting the tone offset within the CPS but all that affects are the key tones.
Thanks!
XPR 6550 TPT Too Quiet
Moderator: Queue Moderator
XPR 6550 TPT Too Quiet
Cheers & 73s,
Josh - KD7FLY
MDC: 3169
P25: 6001165
DMR-MARC: 3142019
---
Josh - KD7FLY
MDC: 3169
P25: 6001165
DMR-MARC: 3142019
---
Re: XPR 6550 TPT Too Quiet
I can check when I return to work, but I know the TPT on my 6550 follows the volume knob position so there must be some setting/check box somewhere in there! Have you tried the help files?
Re: XPR 6550 TPT Too Quiet
Mine does that as well, but it stops at about 30 percent and remains there even when the radio's volume is up to 100 percent.
I searched through the settings thoroughly and was unable to find anything concrete...
I searched through the settings thoroughly and was unable to find anything concrete...
Cheers & 73s,
Josh - KD7FLY
MDC: 3169
P25: 6001165
DMR-MARC: 3142019
---
Josh - KD7FLY
MDC: 3169
P25: 6001165
DMR-MARC: 3142019
---