MT1000 Questions

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
n9ysu
Posts: 57
Joined: Tue Jan 29, 2002 4:00 pm

Post by n9ysu »

What is the minimum voltage that an mt1000 should be run at?
I have a battery that after charging is at 8.1 volts, but shortly thereafter goes to 7.6. It will receive & appear ok after several hours, but when I tested the voltage again, it was at 5.6... Also, will the power on tone not beep if the battery voltage is low? And lastly, does a flashing red transmit light indicate a low battery (I'm guessing the light should be steady)
Top
RadioSouth
Batboard $upporter
Posts: 2884
Joined: Mon Sep 03, 2001 4:00 pm

Post by RadioSouth »

Sounds like you need a new battery. Your correct that a flashing TX light is indicating a low battery. MT1000's will not beep on a low battery.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”