Impala Non-9C Question
Moderator: Queue Moderator
Impala Non-9C Question
Ok, dumb question but I feel like I am about to break something if I don't go ahead and ask. How in the heck do I remove the pull-out "change tray, cig. lighter socket" console, so that I can install a Jotto-Desk CC-1 console. I just can't figure it out, and don't want to tear everything up in the process of figuring. Thanks in advance. -Mike
-
keeper1616
- Posts: 11
- Joined: Tue Jun 21, 2005 1:40 pm
I'm not sure how It's supposed to come out, but I just pulled on mine really hard, and it popped out. It sounded like I broke a plastic tab or something, but it goes back in nicely and works when its back in. Maybe I just didnt care enough about it, but it worked, and it will go back in, so I really dont care right now. 
~~~~Cyrus~~~~
-
The Comish
- Posts: 139
- Joined: Sun Feb 20, 2005 8:31 pm
There is no information regarding the removal of it in the owner's manual. None that I ever found anyways. 
I've found that if you just pull and 'wiggle' it straight out, it will come out. The tray sits in two channels much like a desk drawer. Don't pull down, or sideways. The channels are locked into the metal of the dash by little tabs. I accidently pulled one of the channels out. I managed to get it back in, but I dunno what I would have done if it broken the little tabs on it.
When it comes out, you will need to disconnect the ashtray light and power connectors.
I've found that if you just pull and 'wiggle' it straight out, it will come out. The tray sits in two channels much like a desk drawer. Don't pull down, or sideways. The channels are locked into the metal of the dash by little tabs. I accidently pulled one of the channels out. I managed to get it back in, but I dunno what I would have done if it broken the little tabs on it.
When it comes out, you will need to disconnect the ashtray light and power connectors.