ht1250 programing

[fde302]

I just got back my ht1250 from big M that had an eprom error that was fixed. They replaced a bad board so I'm told so the problem is big M used a newer cps which of I don't have to program it with. I have this radios codeplug saved on the old cps. Is there any way around this like writing to the radio with the old cps codeplug or am I out of luck. Thanks Mike

[HLA]

you definately need newer cps and when you get that the new cps will easily open the saved codeplug and be able to write it to the radio. you will probablly even notice that there are new options turned on and available in the radio and cps.

[fde302]

Do you know what the latest cps program that is out there and part # from big M. What is the going rate for it from big M if you know. Thanks again. Mike

[Al]

As you may have gathered by reading other current posts on here, there's a fixed process you have to complete in order to be able to purchase a software subscription from M. First, you have complete the license paperwork and submit to Motorola for approval. After you receive approval, you can then call them and order a subscription or order via MOL if you've established an account. The part numbers and pricing are details that you can access on the MOL site or by phone after the legal stuff is taken care of. I can tell you that the p/n for CPS for the HT1250 is HVN9025_, and a three year subscription is a little over $300.

[fde302]

Do you have a good Phone number to start the ball rolling with big M. so I can start all the paper work with and get an account with them. Thank you for your help. Mike.

[Al]

If you're in the U.S., 800-422-4210 and then use the prompts to get to customer service.

[ducomm]

I did a search on MOL;

Item Number. HVN9025U
CPS R06.09.06 HT/CDM/EX
List Price: 317.00
Unit of Measure: 1 EA
Lead time (days) 2
Available Y

[john9912]

Latest version is R06.10.02