CDM LS programming
Moderator: Queue Moderator
-
- Posts: 47
- Joined: Tue Aug 18, 2009 8:49 am
- What radios do you own?: XTS 5000,XTL 5000, APX7000
CDM LS programming
I am familiar with programming conventional CDM mobiles. I was asked to add channels to a LS model and I had some questions. I haven't even read the radio yet. Can I program conventional freqs along with the trunked ones? Are all the LS's 16 channel only? Is there anything I need to do with the accessory plug? Thanks.
Re: CDM LS programming
No you cannot have trunking and conventional personalities in the same zone. You can have trunking and conventional personalities programmed in the radio but they must be assigned to separate zones.
You will be limited to a max of 18 conventional personalities.
You will not have any signalling on conventional personalities (QCII, MDC etc).
There is nothing special about the accessory connector, it functions the same for non-trunking and trunking radios.
You will be limited to a max of 18 conventional personalities.
You will not have any signalling on conventional personalities (QCII, MDC etc).
There is nothing special about the accessory connector, it functions the same for non-trunking and trunking radios.
-
- Posts: 47
- Joined: Tue Aug 18, 2009 8:49 am
- What radios do you own?: XTS 5000,XTL 5000, APX7000
Re: CDM LS programming
Thank you. This answers my questions.
Joe
Joe