Motorola Spectra control head problem.

cahighwayman22 · Post by **cahighwayman22** » Thu Dec 24, 2009 7:21 pm

I've got an A7 Spectra control head that has a bright display, however the transmit light blinks when I power the radio up. I know about the 2 different interconnect boards that these radios came with during their production time, I have both (Unmodified HLN 6066B and a modified one that follows the diagram seen on the blenderman website) and it doesn't seem to cure the problem. What could be the cause?

Trevor KI6KGN

d119 · Post by **d119** » Thu Dec 24, 2009 8:23 pm

Is this a trunking radio by chance? Details, please.

cahighwayman22 · Post by **cahighwayman22** » Thu Dec 24, 2009 9:57 pm

It's Conventional 900MHz radio...and all the leaky caps have been replaced in the radio except for the control head.

Trevor KI6KGN

Will · Post by **Will** » Fri Dec 25, 2009 1:00 pm

The two caps in the control head go bad too. Try replacing them.

cahighwayman22 · Post by **cahighwayman22** » Sun Dec 27, 2009 4:04 pm

Ok, I fixed it, yes it was the caps.

Motorola Spectra control head problem.

Motorola Spectra control head problem.

Re: Motorola Spectra control head problem.

Re: Motorola Spectra control head problem.

Re: Motorola Spectra control head problem.

Re: Motorola Spectra control head problem.