MT2000 vhf Radio acting up weird

[bayfire300]

I have an MT2000 vhf that upon powering up it will not rx anything untill I either push the PTT or wait 1 min then if there is now activity it will go into a kind of sleep mode untill I once again hit the ptt button.I tested it w/ a weather frequency and it only rx's when I hit ptt or wait 1 min.weird right?

Any thoughts?

Thank you for reading
Otto



(Otto: I changed your title so that people who may have good knowledge of your radio may be more inclined to look at your topic than to pass over it - Pj)

[Will]

Otto,

Check the settings for receiver mute and the setting for battery saver. Also there is a setting like no receive unless you try to transmit on a busy channel, BUSY Lockout.

You can use the Default F9 key to get back to default settings.

[bayfire300]

I couldnt find those idea/s I have it unmute and could not find busy ch lockout oo anything requarding the ptt.I guess i"ll have to bring it to a shop

[Will]

Otto,

You could read your radio and let one of us here on the BatBoard read it and see if we can find the culprit.

I would be glad to look at your radio and I can do programming also. Probably way less than the "shop".

[bayfire300]

You want me to read and send the codeplug?
Otto

[Will]

You want me to read and send the codeplug?
Otto

Yes, that IS correct. I will PM you with an email address.