Can you identify this unit???

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Tabull
Posts: 27
Joined: Wed Sep 26, 2001 4:00 pm

Post by Tabull »

I have a Motorola unit which has the model number D2901AG. Can anyone identify this unit??? Go to http://www.tabol.com/can_you_identify_these_radios.htm
To see a few pics.
You can reply to me directly at [email protected]

Thanks
User avatar
Ray D. O'Mann #2
Posts: 114
Joined: Tue Sep 11, 2001 4:00 pm

Post by Ray D. O'Mann #2 »

They are Maxar 80 type radios, Unknown what band, and that one looks like it came out of some base station or repeater consolette of some sort, as it has a blank knockout for the mic connector... maybe part of an early mobile repeater package or ?? Anybody else.....?
willbartlett
Batboard $upporter
Posts: 459
Joined: Sun Sep 16, 2001 4:00 pm

Post by willbartlett »

I think I've seen that as the RF package on a few earlier MDTs'

Will
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

That is correct, that IS a data transciever for MDT. It is a Maxar 80 radio with out any knobs!
Tabull
Posts: 27
Joined: Wed Sep 26, 2001 4:00 pm

Post by Tabull »

So can anyone tell me what the pinout is for this unit??? The top 2 larger pins on the plug are power...as viewed from the rear of the radio, the one closest to the heat sink is positive. So anyone know what the rest are?? Where these were used of the freq. range of that model number???
Jonathan KC8RYW
Posts: 1747
Joined: Fri Dec 28, 2001 4:00 pm

Post by Jonathan KC8RYW »

What a find! I have heard of data-only versions of the Maxar family, but have never seen one before. Nice.

Batlabs has the pinout at: http://www.batlabs.com/nosynth.html . It is listed in under the "Moxy" radio, which is a lesser sibling model to the Maxar80. Pay attention only to the text pinout there. Try to ignore the image pinout (that's for the 15 pin low-power version.)

<s>Are</s> Is there any other writing on the metal ID tag on the radio? This might help in ID'ing the frequency band. Also, stamped on the side of the chassis inside will be a TUE/TUD or similar code. This could help tell the band, too.

Again, you have a very neat radio, in my opinion.

_________________
Jonathan KC8RYW
<small style="color: springgreen; ">I'm voting Green in 2004! <a href="http://www.takethepledge.com/">www.take ... /a></small>

<font size=-1>[ This Message was edited by: KC8RYW on 2002-03-24 00:14 ]</font>

<font size=-1>[ This Message was edited by: KC8RYW on 2002-03-24 00:15 ]</font>
Tabull
Posts: 27
Joined: Wed Sep 26, 2001 4:00 pm

Post by Tabull »

Thanks for all the great information so far! I've posted a couple additional pictures to the website. There are a couple more lables inside that might help to identify the freq range and other "features".
Tabull
Posts: 27
Joined: Wed Sep 26, 2001 4:00 pm

Post by Tabull »

Sorry, should have posted the address again:
http://www.tabol.com/can_you_identify_these_radios.htm
The new photos are at the bottom of the page.
User avatar
EC-7
Posts: 139
Joined: Mon Sep 24, 2001 4:00 pm

Post by EC-7 »

Most of those are 800Mhz with DPL squelch. I'm not sure on that exact one though. I don't think they have any other freatures. If you have a Vhf unit, it would be good for Ham radio data modes.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”