Spectra VHF radio programming problem

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
asdfg
Posts: 50
Joined: Tue Apr 19, 2005 4:37 am

Spectra VHF radio programming problem

Post by asdfg »

I have some nice Spectra VHF, but I can nott programming that radio station. I have a right programming RIB cable, but software tell me "Wrong protocol". What is the problem, please?
Top
Ahoeg
Posts: 106
Joined: Sun Dec 22, 2002 7:20 am

Post by Ahoeg »

Hi

What rss version are you trying with??

Regards
Allan
Top
asdfg
Posts: 50
Joined: Tue Apr 19, 2005 4:37 am

Hi Alan!

Post by asdfg »

I have a VERSION R05.03.00 05-APR-92, but I have old radio.
Top
kb3jkp
Banned
Posts: 245
Joined: Thu Apr 29, 2004 4:57 am

Post by kb3jkp »

your computer is too fast...try using REAL dos and not a "dos box" or "command prompt" ...

either that or your supply voltage is too low....
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

That version RSS would be ok for most Spectras.

Use a computer NO FASTER than 166 mhz and REAL DOS, no windows stuff anywhere. A 486 50 mhz is what is recomended.

MUST boot directly into DOS 6.22 or 7.0.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”