![:lol:](./images/smilies/icon_lol.gif)
How do I turn these options back on?
Moderator: Queue Moderator
Seems to work OK for me, both repeated and talkaround. Provide the usual details about your radio...Rayjk110 wrote:I recently enabled DVRS on another 5k of mine ... and when I enabled it, I lost SoftID TX and RX
Rayjk110 wrote:... as well as the ability to turn on secure
Go to the referenced talkgroup in your table (Conventional > Astro > Astro Talkgroup List) and see what the selection is - clear, secure, or select. Betcha it's set to clear.The Help File wrote:Talkgroup
(Conventional Personality, ASTRO Talkgroup Options)
Definition:
Enables Talkgroup functionality while operating in ASTRO Signaling mode and when on the current Conventional Personality.
Important Note:
When this personality’s currently selected ASTRO System has its DVRS Operation Enabled field enabled, this field is automatically set to enabled and becomes view-only. (ASTRO Systems are selected for individual Conventional Personalities from the ASTRO System field).
Accessed Only:
When the Tx Voice/Signal Type field is set to “ASTRO”.
Motorola sells a P25 capable VRS called the Digital Vehicular Repeater System. Astro25 portables (and even mobiles, though I'm not sure why) are capable of talking to a DVRS. The radio can be configured to emit a talk permit tone on successfully engaging the DVRS (by which I mean the portable radio has established communications with the DVRS and the DVRS has brought up the mobile radio in the vehicle).libuff wrote:can someone give me clarification on this subject of DVRS...
So, if i have an ASTRO repeater which i used to utilize w/o DVRS, and enable DVRS, it will give me the triple beep as if it were a trunking system, but still work the same?
it seems to try to affiliate with the system (as my monitor seems to flicker when it xmits).
what exactly IS DVRS, and what is its application? when should it be used, when not?
Works for me also, XTS2500 R9, flash 500008-000410-5. Programmed with CPS 9Rayjk110 wrote:RX mode is "mixed" (using the the Astro personality with DVRS enabled) and TX mode is "analog".
For some reason I can't get it to TX three beeps. I have the following enabled:Nexrad16 wrote:In my case it works simplex or duplex (any repeater). It's interesting but the scan thing is a pain but creating a new personality and not enabling DVRS you could get some scan back but lose the 3beep.