Hello,
I'm hoping that someone would be kind enough to send me a codeplug for an MTS2000 Model 3 (full keypad) in the 403-470 bandsplit (H01RDH...) 255 modes would be a plus.
email [email protected]
Now, the reason I need this is that I am trying to play a bit, and among other things make a Model 2 into a Model 3...
The codeplug needs to be readable in Lab 2.00.01 (I have issues with my buddy's Lab saying some codeplugs are 'too old for this application')
Many thanks!
Mark
<font size=-1>[ This Message was edited by: Mark on 2001-09-27 03:00 ]</font>
Codeplug please :) MTS2000 Model 3 UHF RDH!
Moderator: Queue Moderator
Well noted!
However, the radio in question is a bit of a frankenstein... it does not have an MTS2000 controller, so the closest I'll get to a 01/93 is the 01/92 which is scary enough
I'm playing with what features will be functional and which will not when one takes an 800 MTX controller (with keypad/display support) and throw a UHF RF deck and CP in it.
So far I have found that the radio is not too happy with MDC messaging or Select-Call... when you select MSG from keypad, the radio reboots and self tests!
Mark
However, the radio in question is a bit of a frankenstein... it does not have an MTS2000 controller, so the closest I'll get to a 01/93 is the 01/92 which is scary enough

I'm playing with what features will be functional and which will not when one takes an 800 MTX controller (with keypad/display support) and throw a UHF RF deck and CP in it.
So far I have found that the radio is not too happy with MDC messaging or Select-Call... when you select MSG from keypad, the radio reboots and self tests!
Mark