The thing is Jim, most of these channels are RX only...I would go back to a known good c/p but my flashdisk with my archives has been MIA for two weeks now.
Regards,
-Frank C.
Search found 341 matches
- Thu Oct 14, 2010 5:34 pm
- Forum: Radio Programming
- Topic: XTS5000 Squelch
- Replies: 4
- Views: 837
- Thu Oct 14, 2010 1:54 pm
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: More of a "What if"...
- Replies: 9
- Views: 1168
Re: More of a "What if"...
I was thinking of using simplex, since that's what I'm used too with these sort of setups, but they want to keep the VHF and UHF repeaters on air if the Main sites were to go down, these would act as backup temp's... Making repeaters out of GM300's like this is confusing for me, then add the crossba...
- Thu Oct 14, 2010 9:33 am
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: More of a "What if"...
- Replies: 9
- Views: 1168
Re: More of a "What if"...
Thanks Bill and Jim!
Bill, would sharing both a common vhf and uhf input frequency but different outputs work just as well?
Regards,
-Frank C.
Bill, would sharing both a common vhf and uhf input frequency but different outputs work just as well?
Regards,
-Frank C.
- Wed Oct 13, 2010 10:00 pm
- Forum: Radio Programming
- Topic: XTS5000 Squelch
- Replies: 4
- Views: 837
XTS5000 Squelch
Ok so I read over all the topics, this one specifically /viewtopic.php?f=15&t=90535 , but have yet to come to a definite conclusion. Both my XTS5000R and MTS2000 UHF radio's do this. No transmissions are heard until the Mon button is pressed, yes I do have MDC turned on and have tried both the A...
- Wed Oct 13, 2010 9:57 pm
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: More of a "What if"...
- Replies: 9
- Views: 1168
More of a "What if"...
Say MURS and GMRS was able to be cross-band linked, like 2m and 70cm is. One would have a repeater setup, using GM300's and 1 CDM1250, on 151.820 + .040 offset (randomized) and 462.5625 + 5.00 offset (randomized again). That would have the VHF repeater as 151.820/151.880 and UHF as 462.5625/467.5625...
- Thu Oct 07, 2010 10:36 pm
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: CDM1250 to GM300
- Replies: 5
- Views: 551
Re: CDM1250 to GM300
Ok so I set the pins up again and this time everything turned out right.
Guess I fat-fingered something earlier.
Regards,
-Frank C.
Guess I fat-fingered something earlier.
Regards,
-Frank C.
- Thu Oct 07, 2010 10:04 pm
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: CDM1250 to GM300
- Replies: 5
- Views: 551
Re: CDM1250 to GM300
The TX Light doesn't even turn on...That's my first clue that something is wrong.
Regards,
-Frank C.
Regards,
-Frank C.
- Thu Oct 07, 2010 9:11 pm
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: CDM1250 to GM300
- Replies: 5
- Views: 551
Re: CDM1250 to GM300
The audio isn't passing through at all. from VHF to UHF.
Regards,
-Frank C.
Regards,
-Frank C.
- Thu Oct 07, 2010 5:36 pm
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: CDM1250 to GM300
- Replies: 5
- Views: 551
CDM1250 to GM300
I am able to link a GM300-UHF to a CDM1250-VHF and the audio is repeated UHF to VHF just fine, but not the other way around. The cable is made up for cross-band repeat so that's not the issue. What am I missing with the Pins? Pins 4,6,8,9,12 & 14 are the ones used...The cable is from a good pers...
- Tue Sep 28, 2010 7:13 pm
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
Manual Ack button not answering
Ok guys, I need help again... I went to program in the ManACK button on an A7 head and realized this...The software isn't showing it as an option. With an A9 head it shows up fine, is this feature strictly A9? Never dealt with A7 heads before on Spectra's but assumed all their buttons are the same a...
- Sat Sep 25, 2010 12:45 am
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
Re: MDC Call Feature on Spectra's - UPDATE
Ok guys, I need help again... I went to program in the ManACK button on an A7 head and realized this...The software isn't showing it as an option. With an A9 head it shows up fine, is this feature strictly A9? Never dealt with A7 heads before on Spectra's but assumed all their buttons are the same a...
- Fri Sep 24, 2010 4:40 pm
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
Re: MDC Call Feature on Spectra's
Sounds like that's it.
Regards,
-Frank C.
Regards,
-Frank C.
- Fri Sep 24, 2010 2:56 pm
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
Re: MDC Call Feature on Spectra's
Well for starters it was set to decode only, not encode. Now I have my XTS5000 successfully calling each radio. My next test will be between the two radios.
Thanks for the help guys! When my buddy reads this, I think he'll give his old radio shop a nice little call...
Regards,
-Frank C.
Thanks for the help guys! When my buddy reads this, I think he'll give his old radio shop a nice little call...
Regards,
-Frank C.
- Fri Sep 24, 2010 11:37 am
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
Re: MDC Call Feature on Spectra's
That's what I tried telling him about the status/messages and the Encode/Decode! Perhaps now if he reads this, when I go back over there, he'll see what I'm saying! I'm just glad that they trust me enough to program their radios after the radio shop goofed up on the programming...Now I get to bench ...
- Fri Sep 24, 2010 11:12 am
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
Re: MDC Call Feature on Spectra's
Ha! Sounds like your friend ran into the brick wall of what an older radio can do versus what he thinks it should do. I have used MDC to "private call" one radio from another through a conventional UHF rptr system. All the radios had MDC encode/decode with pre-ptt ani so you could tell wh...
- Thu Sep 23, 2010 11:28 pm
- Forum: Radio Programming
- Topic: MDC Call Feature on Spectra's
- Replies: 11
- Views: 1443
MDC Call Feature on Spectra's
Can someone, in plain english, tell me so that I can tell a friend of mine this one simple fact. He has two spectra's on UHF. Both have the "call" feature and he insists they must call each other since that's what the MDC Call List and Call button were for. What is he doing/saying wrong th...
- Fri Sep 17, 2010 11:29 am
- Forum: Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Topic: Any local agencies still using the Astro Saber ??
- Replies: 61
- Views: 18117
Re: Any local agencies still using the Astro Saber ??
No clue but they somehow got them to do it...
Regards,
-Frank C.
Regards,
-Frank C.
- Fri Sep 17, 2010 12:30 am
- Forum: Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Topic: Any local agencies still using the Astro Saber ??
- Replies: 61
- Views: 18117
Re: Any local agencies still using the Astro Saber ??
Oakland PD in Oakland California still has Astro Sabers. I was talking with a captain today and he actually likes the radio, hates the system though. 800Mhz trunked in a building-rich city...
Regards,
-Frank C.
Regards,
-Frank C.
- Tue Sep 14, 2010 12:40 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Specta Zones
- Replies: 4
- Views: 521
Re: Specta Zones
Might have been. Also the D44 was well noted before hand, thanks Will.
Regards,
-Frank C.
Regards,
-Frank C.
- Mon Sep 13, 2010 4:40 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Specta Zones
- Replies: 4
- Views: 521
Re: Specta Zones
Thanks Jim, that's what I was afraid of. Well in that case I guess it's time to look through the codeplugsupersite for a D44KMA7JA7BK radio. As far as zones are concerned, all my radios are the same in the VHF range, CH1 = 146.52Mhz while 2-97 are AAR and 98-128 are repeaters. Each radio has each ch...
- Mon Sep 13, 2010 4:10 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Specta Zones
- Replies: 4
- Views: 521
Specta Zones
Without going into details, I don't have the Moflag program but need to enable zones on a MLM6.15 board.
What is the exact bitbang spot for it?
Regards,
-Frank C.
What is the exact bitbang spot for it?
Regards,
-Frank C.
- Fri Sep 10, 2010 10:05 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Speaker wiring on Dashmount Spectra
- Replies: 3
- Views: 439
Re: Speaker wiring on Dashmount Spectra
Thanks Bill! This one is going in at home.
Regards,
-Frank C.
Regards,
-Frank C.
- Thu Sep 09, 2010 11:34 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Speaker wiring on Dashmount Spectra
- Replies: 3
- Views: 439
Speaker wiring on Dashmount Spectra
Ok, so I know the speaker wires come off the back DB15 connector and the pins are labelled as: Speaker Hi and Lo. My only question is this...Does it matter which is which when making a cable? I don't want to let the white smoke out.
Regards,
-Frank C.
Regards,
-Frank C.
- Tue Sep 07, 2010 10:23 am
- Forum: Radio Programming
- Topic: Maxtrac 800 codeplug corrupt?
- Replies: 7
- Views: 680
Re: Maxtrac 800 codeplug corrupt?
I've punched, multiple times, all the buttons on the front...Sadly I don't see a front panel/button area in the RSS. Time to head over to RBTIP again...
EDIT: These radios are of the D35MWA5GC3AK family...
Regards,
-Frank C.
EDIT: These radios are of the D35MWA5GC3AK family...
Regards,
-Frank C.
- Mon Sep 06, 2010 11:58 am
- Forum: Radio Programming
- Topic: Maxtrac 800 codeplug corrupt?
- Replies: 7
- Views: 680
Re: Maxtrac 800 codeplug corrupt?
Now I've done that, the only problem I'm having (hence this whole thread) is I can't scroll through the channels...
Regards,
-Frank C.
Regards,
-Frank C.
- Sun Sep 05, 2010 8:00 pm
- Forum: Radio Programming
- Topic: Help.. MTS200 "no hablo espanol"
- Replies: 4
- Views: 605
Re: Help.. MTS200 "no hablo espanol"
Take it easy on him Marc, He's a good person (no trolling there), I know him personally.
What programming software are ya using? Meet me over on 147.000 and I can probably help ya.
Regards,
-Frank C.
What programming software are ya using? Meet me over on 147.000 and I can probably help ya.
Regards,
-Frank C.
- Sun Sep 05, 2010 4:55 pm
- Forum: Radio Programming
- Topic: Maxtrac 800 codeplug corrupt?
- Replies: 7
- Views: 680
Re: Maxtrac 800 codeplug corrupt?
I've read the radio. It has the default 851.000Mhz as tx/rx in each channel...
Regards,
-Frank C.
Regards,
-Frank C.
- Sun Sep 05, 2010 11:17 am
- Forum: Radio Programming
- Topic: Maxtrac 800 codeplug corrupt?
- Replies: 7
- Views: 680
Maxtrac 800 codeplug corrupt?
Guys, Got 2 Maxtrac's that are in the 800Mhz range that it looks like somebody forced a conventional c/p into a trunking unit. The reason for my thinking on this is that when read by Maxtrac RSS 05.01 it shows conventional frequencies, at a total of 11 entries, but I can't scroll through them with t...
- Wed Aug 25, 2010 11:20 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Buttons Help
- Replies: 15
- Views: 2532
Re: Spectra Buttons Help
Nope, I was just curious and now you've killed my cat! Thanks Jim
Regards,
-Frank C.
Regards,
-Frank C.
- Wed Aug 25, 2010 11:19 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra keypad "Time" button ???
- Replies: 23
- Views: 3579
Re: Spectra keypad "Time" button ???
Alex,
Check out what Jim told me just yesterday in this topic. /viewtopic.php?f=1&t=93082
Regards,
-Frank C.
Check out what Jim told me just yesterday in this topic. /viewtopic.php?f=1&t=93082
Regards,
-Frank C.
- Tue Aug 24, 2010 5:41 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Buttons Help
- Replies: 15
- Views: 2532
Re: Spectra Buttons Help
Alright thanks. Guess the time button won't work at all. I also guess I have to find a METROCOM MLM board too. I like that Rt/Rn feature on the local busses :) While we are at it.... I assume DATA is an option to send Packet Data? ALT says Alternate Radio and for that I need a SIU or some sort of ca...
- Tue Aug 24, 2010 7:18 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Buttons Help
- Replies: 15
- Views: 2532
Re: Spectra Buttons Help
Jim,
The Route/Run (Rt/RN) and Time buttons are what I'm most interested in...My other two topics seem to have gone by the wayside... /viewtopic.php?f=1&t=92985
Regards,
-Frank C.
The Route/Run (Rt/RN) and Time buttons are what I'm most interested in...My other two topics seem to have gone by the wayside... /viewtopic.php?f=1&t=92985
Regards,
-Frank C.
- Mon Aug 23, 2010 9:55 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Buttons Help
- Replies: 15
- Views: 2532
Re: Spectra Buttons Help
I was thinking there could be something in the manual that I was missing....
Check your PM's.
Regards,
-Frank C.
Check your PM's.
Regards,
-Frank C.
- Mon Aug 23, 2010 11:31 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Buttons Help
- Replies: 15
- Views: 2532
Spectra Buttons Help
Does anyone have a manual they can reference a few questions for me regarding some of the buttons for a Spectra with A9 head?
Regards,
-Frank C.
Regards,
-Frank C.
- Thu Aug 19, 2010 10:56 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Button Question
- Replies: 1
- Views: 544
Re: Spectra Button Question
Bump/More info.
I see I program a VIP pin for the "Clock". Guess I need to find a detailed Spectra Manual of sorts to figure this one out...?
Regards,
-Frank C.
I see I program a VIP pin for the "Clock". Guess I need to find a detailed Spectra Manual of sorts to figure this one out...?
Regards,
-Frank C.
- Wed Aug 18, 2010 12:22 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Button Question
- Replies: 1
- Views: 544
Spectra Button Question
Alright guys, I see in the Lab 05.03 that there is a button for Rt/Rn which is Route/Run. I set that as a button just to see what it does, and with no shock I don't see it doing much. Anyone got an idea on this button? Besides "oh it's for transit ops", that one is obvious. Also, the TIME ...
- Fri Aug 13, 2010 1:28 pm
- Forum: Radio Programming
- Topic: cdm1250 increase frequency amount
- Replies: 13
- Views: 1995
Re: cdm1250 increase frequency amount
I'd call topic closed on this one. Thanks though.
Regards,
-Frank C.
*PROUD NEW OWNER OF A CDM1250*
Regards,
-Frank C.
*PROUD NEW OWNER OF A CDM1250*
- Tue Aug 10, 2010 2:00 pm
- Forum: Radio Programming
- Topic: Maxtrac 900 programming for ATCS
- Replies: 5
- Views: 1727
Re: Maxtrac 900 programming for ATCS
Yes the subfleet up/down buttons work fine for scrolling.
Regards,
-Frank C.
Regards,
-Frank C.
- Tue Aug 10, 2010 12:07 pm
- Forum: Radio Programming
- Topic: Maxtrac 900 programming for ATCS
- Replies: 5
- Views: 1727
Re: Maxtrac 900 programming for ATCS
Yes the Maxtrac 900Mhz radios work fine for ATCS alongside a trunked system, just don't delete the system. I had issues at first when I did. There are Maxtrac 800Mhz radios that will work fine for the MCP side of things as well. I have 3 different setups all using Maxtrac's listening to the BCP and ...
- Mon Aug 09, 2010 9:41 pm
- Forum: Radio Programming
- Topic: cdm1250 increase frequency amount
- Replies: 13
- Views: 1995
Re: cdm1250 increase frequency amount
I agree with you about the FPP for mobiles!! That's why I try to keep all my radios in the same format, provided they can handle it. Like a 128 VHF spectra and a 160 VHF MTS2000 will have zones/channels identical to each other so I don't have to worry about looking at the display every time. Granted...
- Mon Aug 09, 2010 11:20 am
- Forum: Radio Programming
- Topic: cdm1250 increase frequency amount
- Replies: 13
- Views: 1995
Re: cdm1250 increase frequency amount
Bill, If I know Jason like I think I do, he'll want 90 channels for the railroads in general and the other 38 channels for VHF Ham, etc.
Regards,
-Frank C.
Regards,
-Frank C.
- Sun Aug 08, 2010 8:17 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: APRS and GM300
- Replies: 19
- Views: 2991
Re: APRS and GM300
Jason,
All is well with your wonderfully built cable! Turns out it was the smart-beaconing rate...
Regards,
-Frank C.
All is well with your wonderfully built cable! Turns out it was the smart-beaconing rate...
Regards,
-Frank C.
- Fri Jul 30, 2010 9:56 pm
- Forum: Vehicle Radio Installs
- Topic: Maratrac Help Please!!!!!
- Replies: 16
- Views: 5351
Re: Maratrac Help Please!!!!!
Bill I agree about the green ignition line having to go to the same A+ source.
Regards,
-Frank C.
Regards,
-Frank C.
- Wed Jul 28, 2010 12:07 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: More Spectra Strange Happenings
- Replies: 8
- Views: 1048
Re: More Spectra Strange Happenings
If a 333Mhz and 150Mhz machines are fast, err slow :D enough then I should just throw in the towel, give up my ham license and sell my equipment... I've now successfully over the last 3 years programmed every piece of my own equipment. Thats about 12 spectras, 5 GM300's, 2 Maratracs...Well you get t...
- Tue Jul 27, 2010 3:36 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: More Spectra Strange Happenings
- Replies: 8
- Views: 1048
Re: More Spectra Strange Happenings
Just a small update based off my readings here. When I put in via Clone a similar C/P it'll take it no problem but then when I read it all the extras are gone. This is the same radio I was having trouble with a few months back and put in a new MLM Board. The Dual head setup worked fine from then on ...
- Mon Jul 26, 2010 8:22 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: More Spectra Strange Happenings
- Replies: 8
- Views: 1048
Re: More Spectra Strange Happenings
Alright that's what I was afraid of.
Regards,
-Frank C.
Regards,
-Frank C.
- Mon Jul 26, 2010 6:11 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: APRS and GM300
- Replies: 19
- Views: 2991
Re: APRS and GM300
Bill,
Check your PM inbox here.
Regards,
-Frank C.
Check your PM inbox here.
Regards,
-Frank C.
- Mon Jul 26, 2010 6:09 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: More Spectra Strange Happenings
- Replies: 8
- Views: 1048
More Spectra Strange Happenings
Well here's a new thing for me. My spectra which HAD dual heads enabled got put through a small update (read: Frequency change on a mode) and added a new scan item to the list. Now the dual head option is gone. The siren/pa option had been disabled as well. Anyone run into this issue before? The sav...
- Sun Jul 25, 2010 11:23 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: APRS and GM300
- Replies: 19
- Views: 2991
Re: APRS and GM300
When stopped or moving?
I know when I'm stopped it is every 2 minutes but when moving I do believe it's quite a bit quicker. I'm actually about to head out to the vehicle to do some tweaking to the APRS and I'll post the specifics when I get there.
Regards,
-Frank C.
I know when I'm stopped it is every 2 minutes but when moving I do believe it's quite a bit quicker. I'm actually about to head out to the vehicle to do some tweaking to the APRS and I'll post the specifics when I get there.
Regards,
-Frank C.
- Sun Jul 25, 2010 11:06 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: APRS and GM300
- Replies: 19
- Views: 2991
Re: APRS and GM300
Only when the APRS station is xmitting.
Regards,
-Frank C.
Regards,
-Frank C.