Thanks... it was set to autoscan. Don't know what I was thinking. Thats what I get for programming a code plug at 2:45 in the morning.

Hey guys ...I have a UHF system saber (con 7). When I go to Chan 1 AUTOSCAN is displayed. The regular scn is on the display also. I want to be able to mode scan. I do not want autoscan Where in the RSS would be able to correct this?

Thanks

Wait till you hear this... Had an old Panasonic toughbook pentium 2 that I thought I would try. Loaded the software and dont you know it programmed, no error codes. I thought the pentium's were too fast for these old dos programs. Anyway keep this in mind next time we talk about making sure to use a ...

Ok, checked all connectins, ran both ver. of RSS in DOS 6.21 I
created a new code plug, now I get an error O C1 on three radios. I love the Motorola concept!

Thanks guys. I will give it a try tonight. Is there any way it could be the RSS even though its two different versions? I acquired them both from the same location.

Thanks Scott, I did if fact read and save the code plug. I am able to write back to the radio but it displays err 0 81.I have tried this on three radios and it has caused the same error code. I am wondering if there is something wrong with my rib ( data collisions) ?
I am using a 286 with an ...

I tried reading a saber that had frequencies in it. No problem. After I changed one freq and wrote back to the radio I got an error 0 81.
I can still read the radio but get a check sum errors on cope and core. Any ideas?

Saber 3, H43QXK7139CN
You mentioned the Wrong RSS, Its possiable,I got the unit with SYSSABER and SABER RSS. Any thoughts?

Ok I created a new codeplug and still no luck. Is this a repairable radio?

does any one know how I can correct a ERR 0 81 on a saber 3
thanks

The front option buttons on the keypad are home mode light
1mute 2scn 3call
4lck 5data 6prg
7 P1 8 P2 9 P3
*rcl 0phn #del

crazy question ....where would I be able to get the lab software
N3GRQ

Thanks guys... I guess I wont be able to program this radio anytime soon without the rss. I got this as a package deal and have no outlets for software. Its too bad .......I was looking forward to using the saber looks like a great radio.

Thanks Guys.. There are no tags on the radio its aUHF 256 ch secure saber lll.
this is my one and only saber I have so I cant read a plug from another radio. I must have been given the wrong software. Batdude must be correct. I guess I'm done

Need some help
I Purchased a used saber lll. (nice radio) I tried to read the code plug and received "Codeplug Too New For This Application". Ok now what?
I'm a looser right from the start!

Thanks

I have reprogrammed the vhf radio to be the secondary not the primary. As well as doing the same to the uhf side. It makes no difference which radio is the primary. Also the both tx with full power and pl.

It only tx's when the ptt is pushed. All the equipment is factory as well as the cables. This has been a problem from day one. The way I get around it is I programmed a mode with no Xmit in the opposite band and leave it there when I tx .
Thanks

I have a dual band syntor system. I am able to program both units fine. along with the control head. The problem is when I tx on the uhf band I also tx on the vhf band and the other way around. I removed all options bds as well as replacing the vhf draw. The vhf is the primary radio.
Thanks

Does anyone know if there is software to program the syntor 9000 dual radios into the ham bands ? All attempts to try other methods have failed. Any help would be appreciated

Thanks


N3GRQ
[email protected]

Ok... I used the older ver 4 sp 03, and I am able to get the radio back. No more codes. It seem's I can't program the ham (440- 450) band due to the lack of the option ..Anyone have any suggestions.

Thanks

I have a syntor x9000 system which uses two radio units and one control head. HCN 1036 sp04 The problem I have is I tried to program the system but now I get " Fail 01/90 " The head programs and the radio units program. I can transmit and receive but am unable to switch between uhf or vhf. I checked ...