Where is the option in the RSS as I can not find it!

AAmster

On a Visar Radio is there any way to adjust the low end of the Volume control to make minimum audio really
minimum using the RSS?

AAmster

I am looking for information on the Motorola Display Microphone NMN6169A and the NMN6150A. What is the difference
in these units? Can a NMN6150A be made to look like a NMN6169A? If so what changes have to be made? Which SVA unit
will the NMN6150A work with?

aamster

I am trying to use the NMN6150A Mic with the SVA NTN5487A and a Standard Saber II UHF Radio. I have been unable to get a
display to show on the MIC but the top two rows of buttons are working. The Microphone is supposed to be new and it does
look new. Another Ebay item! Any ideas to a solution?

I have two VHF Saber 1's. When I hook up a NMN6128 Speaker Mike I get no audio from the speaker mike. The mike and PTT seem to be working. When I use the Motorola RTX4005B Test Box, I do hear audio when the speaker out switch is in position "A". When I intsll the NMN6128 Speaker Mike on my several ...

Any ideas? I have a Systems Saber1 H44TUN5170CN H99QX102H.
I can program the 16 Channels Conv. Receive and Transmit. What I can not get to work is the "Autoscan" of the 16 channels receive, that I have programmed into the radio. You are supposed to be able to use one of the two buttons on the side ...

Is the test cable between the radio and the RIB Box the same for a Standard Saber1 and a System Saber1?

Thanks

The only reference I have to Radio Features is under F4 which says "Radio Feature Options" There are two pages or 24 "H" numbers. I see no reference to the the 6D Core.

Is it possible I have an early version of the RSS software. I did not know if we could list the number being used or not.

Thanks ...

I have recently received a Saber 1 VHF H43QSN7139CN the Frequency Range is 148Mhz - 174Mhz. I am trying to get this down to the 144Mhz area. When I go to make a new code plug it will do so but it makes it as a 5D Core and of course when you go to write to the Code Plug it will not do so. I also ...

Monty:

My error .. The cable is the RTK-4203A. This is for the Saber line of radios as it has the Saber connector for the side of the radio. Sorry for the typo.

I recently borowed the RTK-4203A Cable and I have a question. The black coax cable with the female BNC, that is comming out of the RS-232 connector, where does this go in the test setup??

I have a working Saber1, 403 to 430. I find that the receiver is only doing about 10 Microvolts for 20db. I have another Saber1 that is in the split of 440 to 470Mhz and with the same check I find it is approx. .3 Microvolts for 20db.

Is there anyway of tuning one of these radios? If the answer is ...

I have a UHF Saber 1 H44QXN7139CN. The radio is dead there is no sq noise and no xmit. Putting a power supply on the voltage input shows that when the radio is on there is about 10 ma showing which I assume is so you can program the radio. Any ideas why the radio is dead?