I am not sure what the regulations are like in the UK, but when they said it was their frequncy, they may have been saying that they were licenced to use that frequency and you are not. I would check you local regulations to see if it is legal to use your radio on a frequency that they are licenced ...

I do not belevie that you can set up more that one scan bank on the convensional Visors. I have to program one this morning and will take a look at the RSS to be sure.

Greg

Anyone???

I have just picked up a EX600. Does anyone have a users manual in PDF that you could send me?

Thanks

Greg

I am in desperate need of a flex and speaker for a Visar. If you have a parts radio gathering dust and would like to get rid of it please PM me.

thanks

Greg

Thanks. I only need a few functions and space in this install is tight. A& would be greate but I have never changed a code plug. Would need to get an A7 head and then an A& code plug, correct?

Greg

Can the A5 head be programed to run the PA/siren feature? The RSS seams to allow it? Or is a DEK needed.

Thanks

Greg

Needed a place to buy or trade RX/TX crystals for Mot MT500s 155.715

Thanks

Greg

The flex is making contact, My question is if I want to change the speaker in the unit, how does it attach to the flex? Thanks

Greg

How is the speaker held onto the flex on the visar. I have no audio from the internal speaker but do have audio when a mic is attached. The speker appears loose, but I can see no soder joints to the speaker?

Thanks

Greg

A progam that last only 20 min. My luck I would be in the middle of loading a code plug. Just buy a cheap old computer, you can get what you need for $10.

Greg

Hi I desperatly need a flex with speaker and controls ect for a VHF visar. If anyone has one out of a parts radio let me know.

Thanks

Greg

The computer is a 486 laptop running at 100. It has a hard drive and runs window 95. I use a 6.22 boot disk to bring it into DOS. I just can get to the C: prompt.

Thanks

Greg

OK, I can't seem to get the *&^*% computer to go to the c: prompt. I can get it to A: but not C: the best I can do s C:windows. Help


Greg

Thanks I will give it a try tonight. I am using a 6.22 boot disk as an answer to your last question.

Thanks again

Greg

I need some help with programing my spectra. To start with the unit works. Powers up tx and rx. These are what my two problems are:

1. My DOS skills suck. While I have programed other M products in DOS I have always done it off the a: drive. The Spectra program is on two disks and I can't figure ...

Can you use a Motorola Spectra 800 mhz on a EF Johnson trunked system?

Thanks
Greg

Can you interface a Spectra dashmount and a 9000 serien without uning an externall dek box. the dash mount has an a-5 head.

Thanks
Greg

if someone has a dash mount spectra can you give me the dimensions on it. I have a tight apliction to put it into and not sure it will fit.

Thanks

I am torn between the spectra and the syntor x system 9000. What are the actual operational diferences? I ahve reviewed the literature on batlabs, but want to know what I will see in terms of operation. Looking at VHF high operation.

Thanks

Greg

can a VHF pac RT work on a VHF system if the freq are far enough apart, or does it have to be a UHF pac on a VHF systm?

Thanks

Greg

Two issues that you might use in your favor. One is HIPPA. the other is Medicare and Medicaid. In the later no one can sell , buy or charge for the referal of Medicare and Meidicaid Patients. Now they can say that they are charging for a service, but hen hey would have to justify the charge.

Thinking of cahnging from hacked Kemwood 707 to a real radio. Looking at the MCX1000 any thoughs? Can it work with a Pak RT?

Thanks
Greg

Nand,
It seems to be acrost the whole range of the audio, not just on particular area.

Thanks

Sorry of a newbee question, but I figured I could get is answered from this board. I have a used Visar that seems to have a slight audio problem. The audio soulds just off a little and kinda tinny. I have use the speaker mic, and it is still the same. Is there some allinement that needs to be done ...