Batboard

Mikey

Ok, now I feel Stupid. Thanks d119, I had set up the MDC but had only enabled it on the Transmit side, forgot about the receive side on each channel.

Mikey

having problems getting the radio too display the Incoming PTT id's of other radios on its display, I have the 5550 set up to do a pre-key PTT ID and that works fine, but i cannot get it to display the other radios PTT id's on the display when it recieves them, what am i missing here?????

Mikey

Mikey

Is there any way to power up a CDM Mobile that doesn't have a Control Head or Ribbon Cable attached?

I have a lead on several CDM Mobiles that I would like to use as a receiver but they don't have control heads, WOndering if I can jump something on the ribbon cable jack to power them on?

Mikey

Mikey

Ok, this may sound stupid but I have a bunch of old Minitor 2 and Minitor 3 pagers laying around and I have a project where I need a simple little receiver. Due to space constraints I need just the receiver board and not the whole pager in there. Does anybody know the pinouts on either of these rece...

Mikey

One of the biggest Memory Hogs on the M1225 is the "Talkaround" button. if you have a button programmed for talkaround, delete it.

Mikey

Ok, thanks for the help

Mikey

So there is no analog encryption that is built into both radios that will be compatible with both? Crud

Mikey

I have a Motorola XPR4550 at home and a Kenwood NX-700 Nexedge radio in my company truck. Is there any encryption protocol that is built into those 2 radios that isn't proprietary that I can use for a form of simple encryption between the 2 of them without installing aftermarket boards?

Mikey

Mikey

We replaced all our GM300's with CDM1250's for Channel steering on our tone remote adapters when it came time to narrowband them.

Mikey

AL of our new Toshiba laptops on the tech bench at work run Windows 7 professional. the laptop itself doesn't have a 9 pin serial but the Toshiba docking station does have and it works really good. Haven't had any issues with using the serial port on the docking station.

Mikey

looking for the park kill pin in the Acc. Plug. what pin # and what color wire

Mikey

I used to download the Upfitters guide from the Wattco website, now I see they don't have them anymore. Does anybody know where I can download an Upfitters guide for the 2011 Crown Vic Interceptor???

Mikey

Mikey

Pm me your email address

Mikey

Does it show any channels below the last channel that are "Grey'd" out??

Mikey

I have the manual in PDF format, PM me your email address and i will send it over.

Mike

Mikey

I thought those wired into the Acc Connector on the back of the 05 Control head?????

Mikey

I could probably gut one out of some of these old Maxtracs we took out of service and mail you one if you can't find one.

Mikey

Mikey

awwwp, yout totaly right!!!! Sorry I havent used that for so long, i just tried it and it does need to be Cap'd.

Mikey

Mikey

This is true, but when being used as a Password, its not capitalized.

Mikey

Pyramid is the only way to go with In-band Repeaters. They work good as long as they are set up right.

Mikey

My experience with Pyramid is that they want customers to be happy with there products. If you contact them and talk with them about the problems, i would almost bet they will remedy the situation and make it right, then they will go after the radio dealer who has to be "Certified" to inst...

Mikey

the capital of Taiwan is taipei

Mikey

Here is the Catalog we use: http://primuselectronics.com/pdfs/primu ... atalog.pdf

The cover is on Page 84, we buy the reflective orange covers but they come in Black also. THese are for the bigger speaker mics like the Motorola HT1000, Motorola XTS, Kenwood NX, Series radios.

Mikey

Primus makes some for the Railroad that i work for, they work really good.

Mikey

I am trying to make a bi-directional Crossband repeater using 2 maxtracs and a RICK. In one of the maxtracs i have a Internal HLN9376A DTMF decoder board and i would like to use the output of that to control the ignition sense of the 2nd Maxtrac so i can send a DTMF command and have the 1st maxtrac ...

Mikey

Ok, i'm kinda new to this so here is my question. Can i take a Codeplug from a 403-470 Mhz CDM750 and using the "unofficial" US Waris Lab Upgrade Kit, Blast it into a 450-512Mhz CDM750 Radio and make it work???

I'm wanting to bring a 450-512 Mhz down into the 440 Ham Band

Thanks

Mike

Mikey

I have a CDM750 450-470Mhz that i need to take down to the 440mhz HAM Bands, whats an Easy way of doing this? I don't have any Lab Software or anything like that, i only have the regular CPS and Global Tuner. Please Help!!

Mikey

Mikey

I tried and tried and never could get the software hacked to let me load a custom confiq file. I eventually just gave up

Mike

Mikey

Having around a 2-3 second hangtime holds the repeater keyd so if you are carrying on a conversation, you don't have the "Lag" of the repeater keying up and down in between people talking, as long as the person asnwering you keys his radio before the hang timer expires the repeater will st...

Mikey

I have personally seen 3 control heads on a XTL2500, the control head cables were daisy chained together. You have to put the control head in progamming mode i believe and asign it a number of what control head it is in the system.

Mike

Mikey

How much does the TrboVUI Gateway that you hook up to the radio Cost?

Mikey

Buy a good TxRx Duplexer and be done with it. Those are rock solid

Mikey

Pyramid SVR200 All the Way!!!

Mikey

Well the Logic Boards may be different between the GM300 and the R1225 but the GM300 control head will plug right in to where the ribbon cable plugs and give you everything you need to turn it on and program it, then just take the head off and slip the jumper on the pins to power the repeater and yo...

Mikey

Talk with Interstate Battery, They repack alot of our battery pacs for us, just send in your dead battery and they will repack it with new Cells,

Mikey

I have usd a Standard GM300 Head to program a R1225 Before, works just the same!

Mikey

Ohh also, the Comtegra would only do DC control if that function was ordered or Field upgraded with that option. Its a little DC board that piggybacks the main board inside the Comtegra. The Installation manual has a section on Field Upgrading the Console for DC control cloe to the back of the manua...

Mikey

Give me your email in a private message and i will send you the PDF's of the install manual, operators manual, and the CPS Software manual.

Mikey

Mikey

Where would i get a Wire Wound pot? I am aware that if the main radio volume gets turned down it also affects the external speaker, but they hardly ever adjust the volume once they get it set on the main radio.

Mikey

I tried both a 50ohm and a 100 ohm and i get full volume at the max point of the wiper, but when i go to decrease it, it cuts the speaker off all together.

Mikey

I'm wanting to wire a volume pot inside a standard Motorola 13 watt external speaker and plug it into the 16 pin connector on a radius mobile. I know motorola radios can be picky about ground when it comes to the external speaker leads, what is the easiest way to wire a volume pot with an external s...

Mikey

They are probably dropping the carrier between the tones and the voice announcement now, thus making the pager reset before the voice is heard if the pager is programmed that way.

Mikey

The company i work for ownes the second largest Passport site in the US (47 Tower Sites) and we have tried everything from MotoTrbo to Vertex and Icom Passport radio's . Had problems with Mototrbo roaming off to other sites, refusing to lock onto the strogest site. the vertex just plain didn't work ...

Mikey

I have made up a Cat-5E cable at 40" that i use between the Control head upstairs and the RF Deck in the basement. Haven't had any issues, and its been that way for 2 years now. Just don't try and program thru the control head with that long of a cable run.

Mikey

Mikey

Jared, How did you get this pager to do the WX Channels, im trying to get my M3 to do 162.500 but can't figure out how to get it out of band?

Mike

Mikey

Im wanting to use this as a Sales tool to demo the unit at potential customer locations. The only thing i hate is the cheesy layout and limited bility of the default configuration. Why couldn't they have made it to where you could load your own setup and gui's into the demo program? From what i gath...

Mikey

I have several Configurations saved that we have set up for past customers, i just wish there was a way i could load it into this demo so i could have the look and feel of the real console setup the customer will be using. also this would make it helpfull for training before the actual MCC5500 is in...

Mikey

Yes, Thank you a bunch!! For some reason i couldn't find that on there website

Mikey

Does anybody know where i can LEGALLY Obtain Motorola C200 Deskset Software, I think this deskset was originally made for Motorola by Gai-Tronics but i have been to 3 different Motorola Dealers and nobody has the software to program this deskset. Also run into a dead end with Gai-Tronics on the Soft...

Mikey

I'm trying to use it on my computer as a "Demo" but the demo software will not let you reconfigure the gui's on the screen and i cannot use the actual console software because then it won't let you past the login screen cause its trying to find the CEB that isnt there. IF there was a way i...

Search found 354 matches