Batboard

yeah the one i have looks just like a t5600

Yes that answers most. but whats the purpose of makinging it look like a dispatch console?

i have a console i think. it says motorola astro diu and it has a model number of F2040A it looks just like a T-5600. does anyone have any info on these at all?

Looking for any kind of manuals or any kind of information on these comtegra consoles, im looking at setting one up and really need to know about programing and what not with these. i do understand that they req a tone pannel that is in place now and set up ready to go and i know that these are not ...

I need the part numbers for the following parts on mts2000/jedi

rubber gasket/seal
the referb kit and parts contained in it
mts label
motorola label (labels not a prob i can order them on MOL)
uhf whip antenna
uhf stubby antenna

I am in desparate need for a 403-470 Split IMBE archive or s-rec for a Xts3k model doesnt matter nor does flash aslong as it does IMBE

Ok i have a AS3 UHF IMBE and i had an analog conv freq. programmed in with hot key pad enabled and it worked fine and you could hear it pass the dtmf on the other radios fine. NOW i have changed something i dont know i guess and now when you hear it on the other radios it sounds kinda over modulated...

i for got to add i have that aswell

i have four MTX900's i need to program onto my 900 system is there a special software to program the trunking features or am i missing something. im using mtx-900 R02.02.00 i can read the radio and i can edit the two modes in there but i cant add the talkgroups and add more tgs in am i missing somet...

Yes all of those should have MDC capablilties as far as PTT-ID

i am in need of a A7 136-174 vhf codeplug for mt2000 or a 136-174 mod 2 mts codeplug pm me

beeeeeeeeeeeeep bay to all units 10-66 a happy new year be safe 00:07 operator 760

email them to harrisjt@gmail.com and ill host them and put them up on here

ill buy i lol im looking for one i have the manuals for all of it and had one setup for the longest time but i put it in our mob command center

the db9 will gointo the computers com port im making these for some maxons

what kind of db9 would u recommed what about strip board

i want to make a couple of these http://www.446user.co.uk/article_38.html

where would the best place in the us or on the net to get these componets? and is that the proper discripions for them

ok thanks i could probally get it to Line of sight. 2.4 ghz doesnt go through trees and such that well i take it

ok, i have a some property at aprox .802 NE (map below) of me and there is no dsl or highs speed located there my question is i have some roam abouts and i may have a couple of 1 watt bridges, i can talk back and fourth from my location here to the other location with true FRS radios just fine and i...

i am looking for someone that can solder the flex on a astro saber display like the ones seen on ebay is there anyone on the board that can do this? and what do i need to order off MOL as far as part numbers for the flex and whatever needs to go with it http://i8.ebayimg.com/01/i/000/77/c0/f3b4_1_b....

Have we found out if the new "O" series control heads work with MCS2000's? i know there was stipulations to it

remember I was watching an ep of COPS once, and as they do the cop tells the crew a little about himself, his family, his job, interests or whatever elce. He said: "We can't catch all of the criminals out there, you know...Its still hard to get away though. A criminal may be able to outrun an ...

the repeaters are MSF5000's and the radios i have avalable to use are gm300's m216's and spectras

my uncle, owns a tour boat company and there are two sites the company opperates at, they are in different counties. at each site there is a 110 watt conv. repeater, also each site has its own freq. pair. the owner (my uncle) wants to link his two repeaters and i suggested internet linking beings th...

i have 2 spectras i am trying to clear the conventonal modes out and when i attempt to do so the rss locks up. i has never done before and i have re installed the rss so has anyone ran into this problem?

ok i am new to the astro line so heres what i got. i have a xts3000 model number H09RDC9PW5BN and flashcode 000004-002000-2 i know its analog only my question is 1) what is involved in converting this to a model 3 2)what will be involved to convert this to a model 3 with imbe

its a basic form of smartnet it replaced privacy plus trunking

i seem to have misplaced my startsite manuals, does any one have the part numbers of the install and opp manual and any other manual relating to it? or have pdf copys please let me know

i am looking to find a discriminator tap on a spectra and a gtx i have search but could not find any thing clear.

is the system manual is it specific to this paticular system we didnt recive one. where could i look to find one

none of the freqs or sys key will change the system was taken out of service from the local pd and was given to the school board. we are in the process of getting the licence transferd (900 mhz system) the pd has since gone to the countys 800 system for "interop" so we were given the radio...

ive just receved about 4 smartnet controlers 2 i belive is (T-5292A) and the other 2 is (T-5076A) it also came with 20 quantars. what is involved in reprograming the controllers. or does motorola have to do this. i know there is the issue of licencing and such but that has been taken care of. im jus...

Any updates on this post? i say keep it simple. i do all the coms for the school disrict here and its very simple. every school in the district has a repeater (gr300) with its antenna on the tower we use for the microwave links. at the high schools they have a phone interconnect. each school has the...

can i use the saber hand mic for it?i have astro saber hand mic . let me know please Probally not, as pj said its an xts5000 in a saber case and it will most likely use something like the xts' program cable wich is a ribless cable. Correct me if i'm wrong, I dont think anyone has recreated the ribl...

no troubles on the emerg wire i dont need it. Another question is, with the BLK/GRN wire if you strip it back there is a smaller BLK/GRN wire in it aswell as an un shelded one, is this a ground? where should it go? there are other wires in this think like that. thanks -jh

i have a syntor x9000 cable i am not using and was wondering, if it is possable to replace the syntor x9000 connector on the control head cable, and put a DB25 male connector on the cable to use it with a spectra, if so, is there a good wire map or pinout for it.

I'd deffantly would put a fan on it My highschool's R100 has ran without a fan on it lol, one of the high schools in the district I work for (also the high school I went to) but, the repeater set up there is two maxon mobiles with an off brand rick. The whole setup is in an almost water tight box wi...

Yeah, ill take some monday morning

we got some XTL2500 radios for our moble command center with these new heads and they are nice, the pictures do not do them justice its got some nice features to it, and in the original post about them it says the xtl2500 head could work in a mcs2000 if so id like to get one, any one know if this is...

I am in need of a MT2000 mod num H01RDH9AA7AN 403-470 if you have one please pm me or email me at harrisjt@gmail.com

im getting it with a MT2000 radio owell i guess. i was tring to make it a A7 uhf 403-470 MT2000. any one have a codeplug they can send to me so i could complete this?

Is there any way to get around codeplug too old or codeplug too new errors?

the repater and tower has been where it is at for years, opal came through at cat4 and ivan cat 3 and it held up, its non emergency comms on it and im just replaceing the antenna and cable

looking for a recomendation for a good repeater antenna that will be on a 75 ft tower the repeater is 100 watts and is in the 460 range

ok that answers my question i figured not but worth the ask i guess ill find some one to trade this with if i can , thanks

is it possable to convert a 800mhz gtx ltr mobile to a p-plus

i am in need of a mt2000 a7 codeplug 403-470 thanks

-JH

i have two mts portables ive programed them many times before. tonight i go to program info into them and it says radio programed succesfuly but nothing in the radio has changed. when i re read the radio all of the old info is still there is this a battery or rib problem?

i have a mcs2000 i need a codeplug ofr or someone to fix a corruped codeplug for my mcs2000 model# M01SHL9PW4AN pm me or email me a harrisjt@gmail.com

Search found 124 matches

Re: Motorola DIU console? model F2040A

Re: Motorola DIU console? model F2040A

Motorola DIU console? model F2040A

Comtegra console

MTS-2000 Part numbers needed

XTS3000 Archive or S-rec request

AS3 DTMF probs

MTX-900 help

MT2000

b

componet question

Wifi rf question

Astro saber display solder

"O" series control heads

Internet linking -most inexpensive way

Spectra rss

conversion of xts3000

Startsite manuals

discriminator tap

Programing of trunking controllers

x900

x9000 control head cable

r

zx

Codeplug request

hj

codeplug too old/codeplug too new

erte

repeater antenna

k

800mhz gtx mobile question

mt2000 A7 uhf help

wierd mts-2000 problem

wanted codeplug or someone to reparir

h